Adjusting The Belt Contact Points For The Second Scanner - Ricoh C231 Service Manual

SCANNER

Adjusting the Belt Contact Points for the Second Scanner

[B]
[C]
[A]
C267R081.WMF
• ADF or platen cover
• Front cover (
3.2.1)
• Operation panel (
3.2.2)
• Rear cover (
3.2.3)
• Top rear cover (
3.2.4)
• Left upper cover (
3.2.4)
• Exposure glass (
3.4.1)
1. Disconnect the platen cover sensor connector [A].
2. Scale bracket [B] ( x 2)
NOTE: 1) Take off the scale bracket, otherwise the screws [D] cannot be
loosened.
2) Take off the bracket [C] in order to take off the scale bracket.
SM 3-13 C267