3.7.7 PAPER SEPARATION PRESSURE ADJUSTMENT
The position of the screw can be changed in order to change the amount of
pressure exerted by the friction pad.
This adjustment can be done:
• When feeding special paper, especially thick paper
• When the customer is experiencing feed problems.
• Move the separation pressure slider [A] to position 1.
Increase the paper separation pressure: Move up the screws [B]
Decrease the paper separation pressure: Move down the screws [B]
Default position: lowest position
The adjustment is automatically applied to all settings of the separation pressure
slider.
SM
[A]
[B]
[B]
C267R020.WMF
3-33
PAPER FEED
C267