Switches - Ricoh C231 Service Manual

No. Display
*120 User Code
-1 Mode
-2 Auto Reset
Time
*121 UC Count
*122 Clear UC
Count
*123 Total UC
Count
*124 Clear Total
UC Count
130 Input Check
Mode
131 Output
Check Mode
132 All Indicators
ON
135 SN: Master
End
140 Ink Detection Specifies whether ink
141 Paper
Detection
142 Master End
Detection
146 ADF Cover
Detection
147 ADF Set
Detection
150 Control ROM
No.
SM
Function
Selects user code mode.
Selects the auto reset time. 0: Unlimited
Displays the total number of
masters and prints made
with each user code.
Clears the selected user
code counter.
Displays the total number of
masters and prints for up to
20 user codes.
Clears the total user code
counter.
Displays the inputs from
sensors and switches.
Turns on the electrical
components.
Turns on all the indicators
on the operation panel.
Displays the master end
sensor voltage.
detection is done.
Specifies whether paper
end detection is done.
Specifies whether master
end detection is done.
This mode disables the ADF
cover switch.
This mode disables the
platen cover sensor
detection.
Displays the ROM part
number and the ROM
manufacturing date.
4-17
SERVICE PROGRAM TABLE
Factory
Settings
Setting
0: No See the user
1: Yes code mode
section.
0 Displays only
1: 1 min. when "Yes" is
2: 2 min. selected in
3: 3 min. SP120-1.
4: 4 min.
5: 5 min.
0 Press the # key
to shift to
another user
code.
0: No 0 Same as
1: Yes above.
0
0: No 0
1: Yes
See the input
check table.
See the output
check table.
Press the # key
to light all the
indicators.
Unit: Volts
0: No 1
1: Yes
0: No 1
1: Yes
0: No 1
1: Yes
0: No 1 This function is
1: Yes valid only when
SP2 is set at
"1".
0: No 1 If "0" is
1: Yes selected, "Set
the original" is
displayed each
time at master
making.
P/No. YYYY/MM/DD
C231/C237/C238
Comments