Input/Output Check Mode; Input/Output Check Mode Access Procedure - Ricoh C231 Service Manual

4.4.3 INPUT/OUTPUT CHECK MODE

This program checks the electrical components.

Input/Output Check Mode Access Procedure

1. Access the SP mode. (See the SP mode access procedure.)
2. Enter 130 (for the Input Check mode) or 131 (for the Output Check mode) with
the number keys.
3. Press the Enter (#) key.
4. Enter the desired number. (See the Input or Output Check Table.)
NOTE: The number can be shifted up or down by pressing the Select Size
And Direction (" " or " ") keys.
5. Press the Enter (#) key.
NOTE: In the input check mode, all printing speed LEDs turn on when the
sensor or switch that is being tested is actuated. A beep will also be
heard.
6. For the Output Check mode, press the Start key to turn on the component.
7. Press the Enter (#) key to return the display to the initial input or output check
menu.
8. Press the Clear Modes key to leave the SP mode.
SM
INPUT/OUTPUT CHECK MODE
4-23
C231/C237/C238