Interface Board (Option); Accessory Check; Installation Procedure - Ricoh C231 Service Manual

INSTALLATION PROCEDURE

3.2.5 INTERFACE BOARD (OPTION)

Accessory Check

Check the quantity and condition of the accessories in the box against the following
list:
1. Interface Board ................................................................... 1
2. Interface Harness................................................................ 1
3. Screw M3 x 6 ...................................................................... 2
4. Lock Screws........................................................................ 2
5. Washer................................................................................ 2
Installation Procedure
[A]
[B]
1. Turn off the main switch and unplug the power cord.
2. Remove the upper rear cover.
3. Remove the MPU cover.
4. Connect CN102 of the interface board [A] to CN110 [B] of the MPU board and
secure it using two screws.
5. Connect the harness [C] to CN101 of the interface board, and secure it to the
connector bracket [D] using two lock screws and washers.
6. Remove the communications port cover plate from the upper rear cover.
7. Reinstall the MPU cover.
8. Reinstall the upper rear cover.
C231/C237/C238
[C]
C532I533.PCX
3-18
[D]
SM