DRUM
3.8.4 INK PUMP ADJUSTMENT
Purpose: To ensure the smooth operation of the ink pump plunger by properly
positioning its holder.
[B]
[A]
C238R014.WMF
Remove the drum
[A]: Lower pump cover ( x 2)
[B]: Upper pump cover ( x 3)
[D]
[F]
[E]
[C]
C238R015.WMF
1. Remove the E-ring [C] to free the plunger from the pump drive slider [D].
2. Loosen the two screws securing the holder [E]. (Do not remove the holder.)
3. Push the plunger [F] until it reaches the bottom.
NOTE: The end of the plunger [F] must not stick out from the holder [E].
C231/C237/C238
3-24
SM