Sp8-10: Test Patterns; Sp8-21: Paper Feed Test (30 Rpm); Sp8-22: Free Run Paper Feed (30 Rpm); Mechanism - Ricoh C231 Service Manual

SP8-10: TEST PATTERNS

5.9.5 SP8-10: TEST PATTERNS
Makes prints without using the scanner.
Access SP8-10 and select the number "6", then press the "Enter(#)" key.
Other numbers are as shown below
1: Grid, 2: Vertical, 3: Horizontal gray, 4: Vertical gray, 5: 16 grays,
6: Cross, 7: Diagonal grid, 8: 256 grays, 9: 64 grays

5.9.6 SP8-21: PAPER FEED TEST (30 RPM)

Feeds paper at the lowest speed (30 rpm), and applies printing pressure.
1. Set a stack of paper on the paper feed table.
2. Access SP8-21 and press the OK key.
3. Exit the SP mode and enter the number of sheets that you want to feed.
4. Press the Print key.
5. To exit this mode, turn off the main switch.

5.9.7 SP8-22: FREE RUN PAPER FEED (30 RPM)

Drives the paper feed mechanism at the lowest speed (30 rpm) without paper.
1. Access SP8-22 and press the OK key.
2. Exit the SP mode and enter the number of times that you want to repeat the
paper feed cycle.
3. Press the Print key.
4. To exit this mode, turn off the main switch.
C267 5-22 SM