Mode Settings; Administrator Tools; Online Settings - Ricoh C231 Service Manual

5. Mode Settings

No. Mode
1 Auto Cycle
2 Background Correction
3 Longer Paper
4 Combine/Repeat Priority
5 Cmb / Img Repeat Sep.
Line
6 Cancel Combine setting
7 Skip Feed
8 Memory Mode Setting
9 Auto Class

6. Administrator Tools

User Codes
If user codes are turned on, operators must enter their user codes before they
can operate the machine. The machine keeps count of the number of masters
and prints made under each user code.
No. Mode
1 Display Counter(s)
2 Clear Counter(s)
3 User Code Management
4 Key Counter Adjust

7. Online Settings

No. Mode
1 Hold Data-in
SM
Description
You can select to have Auto Cycle mode as either "On"
or "Off" when the power is turned on.
When you make prints in Photo, or Text/Photo mode, the
background of the prints might appear dirty. In this case,
you can select background correction to improve the
clarity of your prints.
If you are making prints on paper of custom sizes, you
can set "Use".
You can choose to have either Combine or Repeat
selected by default when the power is turned on.
You can specify the type of separate line of combine and
repeat.
You can specify whether Combine/Repeat mode will be
automatically cleared after you have finished your print
job.
You can specify the number of times that the drum
rotates when in Skip Feed mode.
You can choose to have either Memory mode or Stack
Memory mode as the default.
Under the Class mode, the machine stops after it is
finished a Class print job. When you select Auto Class,
the machine stops for 2 seconds and then goes on to the
next Class print job.
Description
You can check the number of masters and copies made
under each user code.
You can clear each or all user code counters.
You can select whether or not to use User Code mode.
Normally, the optional key counter counts the number of
prints regardless of the number of masters used. You
can, however, add to the key counter a value between 0
and 50 to the key counter each time a new master is
used.
Description
You can select to have Hold Data-in mode either "On" or
"Off" when the power is turned on, or after mode settings
have been cleared.
5-25
USER TOOL LISTS
C267