Sp2-33: Re-Feeding; Sp2-6: Image Position Display; Sp2-33: Re-Feeding Setting; Sp2-40, 2-55: Thermal Head Energy Control - Ricoh C231 Service Manual

5.3.2 SP2-6: IMAGE POSITION DISPLAY

When the user moves the image position on the operation panel, this SP controls
the length of time that the adjustment value is shown on the display before the
screen goes back to the previous display.
'Slow' means that the display is shown for the longest time possible.

5.3.3 SP2-33: RE-FEEDING SETTING

When the machine performs re-feeding, the paper registration position can be up to
5mm out of range. If this incorrect position is not acceptable to the customer,
change this SP mode to "OFF".
ON: Re- feeding is on (factory setting).
OFF: Re- feeding is off.

5.3.4 SP2-40, 2-55: THERMAL HEAD ENERGY CONTROL

2-40~45: The default is 7%. This means that during normal printing mode, the
thermal head energy is 93% of the maximum possible (100 – 7).
2-50~55: The default is 15%. This means that in economy printing mode, the
thermal head energy is reduced by another 15%. With the default
settings, this means that the thermal head energy is 85% of maximum
power (100-15).

5.3.5 SP2-60: BOLD MODE: LETTER MODE ONLY

Makes a bold outline of a letter-mode image.

5.3.6 SP2-61: T/H SWING MODE

If this is set to 'ON', the thermal head writing position is moved a small amount
between masters. The amount is set with SP2-61 (T/H Swing Amount)
automatically. This changes the side-to-side margin on the master.
This prevents the same parts of the thermal head from being used all the time,
because if masters that contain the same image (such as a logo) are made
frequently, this can burn out the thermal head.
Default: OFF
SM
SP2-6: IMAGE POSITION DISPLAY
5-5 C267