Output Check Table - Ricoh C231 Service Manual

INPUT/OUTPUT CHECK MODE

Output Check Table

Code LCD Display
3 MOTOR: Master Eject
6 MOTOR: Vacuum
7 MOTOR: Air Knife
8 SIG: Key Counter
9 COUNTER: Master
10 COUNTER: Paper
12 MOTOR: Ink Supply
14 SOL: Print Pressure
18 MOTOR: Paper Table
Down
19 MOTOR: Paper Table
Up
21 SIG: Fluorescent Lamp
22 MOTOR: Cutter
+ Direction
23 MOTOR: Cutter
Home
MOTOR: Drum Home
27
Stop
28 MOTOR: Drum Plot
Stop
33 MOTOR: Original Feed
MOTOR: Master Feed
34
High Speed
35 MOTOR: Master Feed
Low Speed
C231/C237/C238
Turns on the master eject motor.
Out- 3
Turns on the vacuum fan motor.
Out- 6
Turns on the air knife fan motor.
Out- 7
Increments the key counter.
Out- 8
Increments the master counter.
Out- 9
Increments the paper counter.
Out-10
Turns on the ink pump motor.
Out-12
Turns on the pressure release solenoids.
Out-14 At the same time, it turns on the paper
transport motor.
Turns on the paper table motor (down).
Out-18
Turns on the paper table motor (up).
Out-19
Turns on the xenon lamp.
Out-21
Turns on the cutter motor.
Out-22
Turns on the cutter motor and moves the cutter
to the home position.
Out-23
Turns on the main motor and moves the drum
to the home position.
Out-27
Turns on the main motor and moves the drum
to the master making position.
Out-28
Turns on the ADF motor.
Out-33
Turns on the master feed motor at high speed.
Out-34
Turns on the master feed motor at low speed.
Out-35
4-26
Description
SM