Accessory Check; Color Drum (Option); Installation Procedure - Ricoh C231 Service Manual

INSTALLATION PROCEDURE

1.2.2 COLOR DRUM (OPTION)

Accessory Check

Check the quantity and condition of the accessories in the box against this list:
Description
1. Color Indicator Decal ...........................................................5
Installation Procedure
CAUTION
To avoid serious injury, do not connect the power plug to the machine until
you are instructed to do so.
1. Remove the protective sheets [A] from the drum.
2. Attach a color indicator decal to the drum case. The decal must be the same
color as the ink in use.
3. Remove the drum from the machine.
4. Leave the master wrapped around the removed drum to protect the drum from
dust and from drying.
5. Keep the removed drum in the drum case.
6. Install the color drum in the machine.
NOTE: The color drum indicator on the operation panel stays lit when a drum
is mounted in the machine.
7. Remove the ink cartridge cap.
8. Insert the ink cartridge in the ink holder.
9. After main body installation, firmly insert the power plug in the outlet.
10. Turn on the main switch.
11. Make a master and make 30 prints with this master. Do this at least three times,
until the image quality is acceptable.
NOTE: This is a new drum. Because of this, before the first print is made, ink is
supplied automatically. This takes 2 minutes.
C267
C267I900.WMF
1-14
Quantity
[A]
SM