Service Program Table; Led's - Ricoh C231 Service Manual

4.4.2 SERVICE PROGRAM TABLE

*: Accessible by a customer
No. Display
1 This SP number was used to enable the On-line key for some other models. On
this model, the On-line key is enabled automatically when the optional PC
controller is connected, SP number 1 is not used.
2 ADF Unit
3 Key Counter Enables key counter
4 Key Card
*5 Tape Marker
Off
*10. Min. Print
*11 Max. Print
*12 Set Display
Mode
*13 Set Size
Mode
14 Set
Operation
Panel
15 Set Drum
Size
16 LCD
Contrast
Adjust
SM
Function
Enables ADF operation.
operation.
Used only in Japan.
Disables tape marker
operation.
Limits the minimum print
quantity that can be
entered.
Limits the maximum print
quantity that can be
entered.
Selects the language used
on the display.
0: Japanese
1: English
2: German
3: French
4: Italian
5: Spanish
6: Chinese
7: Dutch
8: Brazilian
Selects the metric size (mm)
or inch size on the display.
Selects the expression type
on display that matches the
machine.
Selects the drum size that
matches the machine.
NOTE: This function is for
production line use only.
Changes the LCD contrast.
4-11
SERVICE PROGRAM TABLE
Factory
Settings
Setting
0: No 0
1: Yes
0: No 0
1: Yes
0: No 0
1: Yes
0: No (Use 0
the tape
marker)
1: Yes
0 to 9999 0
0 to 9999 9999
0 to 8 1
0: mm
-
1: Inch
0:JPN/CHN - Never change
the setting.
1:OTHER
0:B4 - Never change
the setting.
1:A4
2:LG
17 to 24 21
C231/C237/C238
Comments