Table of Contents
Advertisement
3-15. PROGRAMMING
703
1.
Press and hold
in the display, followed by "ENTER CODE".
2.
Enter code 1, 2, 3. "SELECT PRODUCT...PRESS
PROG" scrolls across the display.
3.
Press and release the desired product button (1 to 10).
If no buttons are pressed within approximately 2 minutes
while in the Program Mode, the controls will revert back
to the Cook Mode.
Press
to copy a product, erase a product, preset a
product, erase all products, or preset all products. See
Copy/Erase Pre-Set Products Section.
4.
Press and release
shows in the display. Ex. " NAME"FRIES".
Change Product Names
a. Press and release
starts flashing.
b. Press and release
c. To continue to the next letter, press
to change this letter.
d. Repeat step c until up to 7 letters are entered.
e. Press and hold
release
until "PRELOAD" shows in display, to
continue with Program Mode.
5.
The Preload Mode allows the operator to drop large pieces
first, with the lid up, before loading the rest of the product.
The preload cycle always runs without pressure and which
always regulates to the Step 1 cook temperature. Press
to set a preload time, or press
preload is desired.
Model PFE- 591
for one second until "PROG" shows
. The name of that product
and the first letter, or digit,
to change the flashing letter.
. Then press
to exit Program Mode, or press and
if no
3-29
Advertisement
Table of Contents
