Table of Contents
Advertisement
3-15. PROGRAMMING
(continued)
3-30
6.
Press and release
the display along with the preset time. Press
to change the time. The time shows in minutes and seconds.
Press and hold the buttons, and the time will jump by 5
second increments to a maximum of 59:59.
7.
Press and release
display, along with the preset temperature on the right side of
the display. Press
Press and hold the buttons and the temperature will jump by 5
degree increments to a max. of 380°F (193ºC), and a min. of
190°F (88ºC).
8.
Press and release
in the display along with "YES" or "NO". Press
to build pressure in the first step, or not.
9.
Press and release
display, along with a step 2 time. If no step 2 is desired, set
time to "0:00" and press
and set a time. Then press
temperature and pressure.
Up to 10 steps can be programmed for a product, repeating
the above step for each cooking step.
10. Press and release
in the display. Press and release
Ex: If a Cook Cycle was set at 3 minutes, and an alarm was
to go off after 30 seconds into the cook cycle, "2:30" would
be set in the display at this time. When the timer counts down
to 2:30 the alarm sounds.
Model PFE- 591
and "1. COOK TIME" shows in
and "1. TEMP" shows in the
to change the temperature.
and "1. PRESSURE" shows
and "2. STEP 2 AT" shows in
. If a step 2 is desired, press
to set
and "ALARM – 1 AT 0:00" shows
to set an alarm.
403
Advertisement
Table of Contents
