Table of Contents
Advertisement
3-14. PREVENTIVE
MAINTENANCE
Continued)
703
Reversing Lid Gasket - Every 90 Days
Reversing the lid gasket helps to prevent early failure of lid gasket
and the loss of pressure during a cook cycle.
1.
Raise the lid and remove racks and carrier.
2.
Grasping the lid handle, lift the front of the lid up until it
stops in an upright position.
Be sure the metal arm on the left side of the lid is in the
vertical position holding the lid upright, or severe
injuries could result. (See photo at left).
3.
Using a thin blade screwdriver, pry out the gasket at the
corners. Remove the gasket.
Check the gasket for any tears or nicks. If the gasket is
damaged, it needs to be replaced.
4.
Clean the gasket and gasket seat with hot water.
5.
Rotate the gasket with the opposite side facing out.
Install the 4 corners of the lid gasket. Smooth the
gasket into place, working from the corners towards the
middle of each side.
Model PFE- 591
3-27
Advertisement
Table of Contents
