Table of Contents
Advertisement
3-17. INFORMATION MODE
(Continued)
3-46
4. REVIEW USAGE
Press
to view the accumulated information since the data
was manually reset:
FUNCTION
Day the usage data was previously reset
Number of hours the fryer was on
Number of times oil was filtered
Total number of cook cycles
Cook Cycles stopped before "DONE"
Percentage of Cook Cycles before oil change OIL WEAR -A-
Percentage of hours before oil change
Cook Cycles for Product #1
Cook Cycles for Product #2
Cook Cycles for Product #3
Cook Cycles for Product #4
Cook Cycles for Product #5
Cook Cycles for Product #6
Cook Cycles for Product #7
Cook Cycles for Product #8
Cook Cycles for Product #9
Cook Cycles for Product #0
Reset usage data:
Enter the Mgr Code (1, 2, 3 unless changed)
on this step to zero out all the usage
information.
Press
5. INP A_CVHDSF_M
Press
input signal is detected, an identifying letter is displayed (see
below). If the signal is not detected, "_" is displayed.
With the COOK/PUMP switch in the COOK position, and all
inputs detected, "H_ P_ A_CVHDSF_M" shows in the display.
See below for "definition" of codes.
A = COOK/PUMP in COOK position.
B = COOK/PUMP in PUMP position
C = Solenoind continuity; won't show with pressure on
V = Volts - 24 VAC detected
H = High Limit - If "H" is present, the high limit is good; if "H"
is missing, the high limit is tripped (overheated) or faulty
D = DRAIN SWITCH-If "D" is present, the drain handle is
closed; if "D" is missing, the drain is open or faulty
S = COOK/PUMP switch ON interlock circuit: If "S" is
present, the COOK/PUMP switch is in the COOK position.
If the "S" is missing, the COOK/PUMP is either off, failed,
or wired incorrectly
F = FAN
M = MV-Detects 24 V jumper to MV terminal
to continue to INP A_CVHDSF_M
to view the status of components and inputs. If the
Model PFE- 591
DISPLAY EX:
SINCE
APR-19
PWR ON HRS
165
FILTERED
34
TOTAL CK
462
TUE* QUIT COOK 4
73%
OIL WEAR -B-
47%
COOKED -1-
193
COOKED -2-
107
COOKED -3-
58
COOKED -4-
0
COOKED -5-
13
COOKED -6-
69
COOKED -7-
0
COOKED -8-
7
COOKED -9-
15
COOKED -0-
0
RESET USG/
ENTER CODE----
1005
Advertisement
Table of Contents
