Table of Contents
Advertisement
2-2. UNPACKING
INSTRUCTIONS
(Continued)
404
7.
Remove the counterweights from the pallet, which are
strapped to the pallet, under the fryer.
Do not drop. The counterweights weigh approximately
18 lbs. (8.1 kg.) each. Handle with care, or personal
injury could result.
8.
Remove rear cover.
9.
Load the seven weights into the counterweight assembly. See
page 2-4.
10. Replace rear cover.
11.
Cut warning tags from the lid assembly. The lid may now
be unlatched.
12. Remove the accessories from inside the filter drain pan.
13.
Prepare the deadweight valve for operation
The metal packing spacer is placed inside the deadweight
valve housing to protect the deadweight orifice and dead-
weight during shipment. Remove this packing spacer prior to
installation, in order to build pressure.
A.
Unscrew the deadweight cap.
B.
Remove the deadweight.
C.
Remove and discard the metal packing spacer.
D.
Clean the deadweight orifice with a dry cloth.
E.
Carefully place deadweight over deadweight orifice.
Replace deadweight cap, finger tight.
14.
Remove the protective paper from the fryer cabinet.
It is necessary to clean exterior surface with a damp cloth.
Model PFE- 591
2-2
Advertisement
Table of Contents
