Table of Contents
Advertisement
3-15. PROGRAMMING
(continued)
403
After the alarm time is set, press
"TYPE" flashes in the display, with the alarm type on the right
side of the display. "TIME", "SHAKE", "STIR", "ADD",
and "LID" can be set by pressing
sounds and alarm type flashes, prompting the operator to
shake the basket, stir the product, or add product. If
"TIME" is selected, the time remaining flashes in the display.
If "LID" is selected, "CLOSE LID" flashes in the display.
The timer count-down is paused until the lid is closed and
is pressed to restart the timer.
Up to 4 alarms can be programmed. After the first one is
set, the other alarms can be accessed by pressing
11.
Press and release
the display along with the preset holding time. Press and
release
To exit the Program Mode at any time, press and hold
for 2 seconds.
12. Press and release
the display along with the load compensation value. This
automatically adjusts the time to account for the size and
temperature of the cooking load. Press and release
to change this value to a max. of 20 and a min. of 0 or
"OFF". Preset at factory at 5.
13. Press and release
the display (if load compensation is set to "OFF", then
"_ _ _" shows in display) along with the load compensation
average temperature. This is your average cooking
temperature for the products you cook. The timer speeds up
at temperature above this setting and slows down at
temperatures below this setting. Press and release
to change this value.
Model PFE- 591
and "ALARM" and
. An alarm
until "QUALITY TMR" shows in
to adjust the holding time, up to 59:59.
and "LOAD COMP" shows in
and "LCOMP REF" shows in
again.
3-31
Advertisement
Table of Contents
