Level 1 Programming; Modifying Product Settings - Henny Penny LVE-102 Operation Manual

4-1. MODIFYING
PRODUCT SETTINGS
Dec. 2007
SECTION 4. LEVEL 1 PROGRAMMING
Level 1 contains the following:
• Modify product settings
• Set the AIF clock for products
• Perform the Deep Clean procedure
• Fryer Setup Mode
1. Press and hold
display, followed by ENTER CODE.
2. �������������������������������
"SELECTN" show in the displays.
3. Press right
NUGGETS) show in the displays.
Change Product Names
4. Use the
press the desired product button
5. Press right
the left display and "MODIFY", and "YES NO" shows in the right
display. Press the
button to choose another product.
ü
6. If
���������������������������������
that was pressed. For example, if
changes to an "A".
��������������������������������
���������������������������������
the desired letter shows in the display, press
to the next letter and repeat the procedure.
Press and hold the right
button to continue on to "1. COOK TIME".
To Change Times and Temperatures
7. Press
then use the product buttons
the time in minutes and seconds, to a maximum of 59:59.
and buttons until LEVEL - 1 shows in the
ü
button and 'SELECT PRODUCT' and "-P 1-" (ex:
and buttons to scroll through the 40 products, or
ü
button and the product (ex: NUGGETS) shows in
ü
button to change this product, or press the X
button was pressed, press and release a product button and
ü
button to exit Program Mode, or press
button until "COOK TIME" shows in the display, and
4-1
Model LVE-102, 103, 104
.
����������������
button to continue
to change