Reset all setting to factory defaults except for your network settings.
To reset your product to default setting, follow these steps:
1. Go to the
2. The PIN input screen appears. Enter the four digit security PIN using your remote.
3. When done, the PIN screen disappear automatically. The message
return to factory
4. Select Yes. All settings are reset. The product will turn off and on again automatically. The
appears. For more information about Setup, see the paper user manual.
menu lets you upgrade your product's software to the latest version.
Version: This is the software version already installed in the product.
Upgrading to the Latest Version you can upgrade in five ways:
You can upgrade in four ways:
Standby Mode Upgrade
The five methods are explained in the following pages.
Be careful not to turn off the power until the upgrade is complete. The product will turn off and on automatically
after completing the software upgrade. When you upgrade software, all video and audio settings you have made
will return to their default settings. We advise you to write down your settings so that you can easily reset them
after the upgrade.
English - 93
"All settings, except network settings, will