so that your product turns on automatically at a time and on a day of your choosing. You can set up
the product plays when it turns on: an air or cable channel, a USB device, or a set-top box connected to one of the
product's inputs (HDMI1, AV, etc.).
You must set the clock before you can use the
Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat,
the days you want
mark indicates days you've selected.
Time: Set the time that the product turns on automatically.
Volume: Set the desired volume level. Change the volume level using your remote.
Source: To select the source of the content that will play when the TV turns on. You can:
and have the TV display a specific air or cable channel.
and have the TV play back photo or audio files from a USB device.
Select a source on your TV (HDMI1, HDMI2, Component, etc.) that you have connected a set-top box to, and
have the TV display a channel from the set-top box.
The USB device must be connected to your TV before you can select USB.
If you select a source other than TV or USB, you must:
Have a cable or satellite set-top box attached to that source
Set the set-top box to the channel you want to watch when the TV goes on.
Leave the set-top box turned on.
When you select a source other than
played when the TV turns on automatically or a folder that contains music and a folder that contains photo files. If
you select both, the TV will display the photos you selected as it plays the music you selected.
to turn on your product.
is set to TV): Select
is set to TV): Select the desired channel.
is set to USB): Select a folder in the USB device that contains music that you want
English - 81
3) and select the source of the content
or Manual. If you select Manual, you can choose
options will disappear.