1. The product searches for and then displays all the wireless networks within
range. When done, it displays a list of the networks. In the list of networks,
move the Highlight to select a network, and then select Next. If the selected
network requires a Security Key, the Security Key screen appears.
If you have a WPS(PBC) compatible router, select
and then follow the directions on the screen. When done, go to Step 4.
2. Enter your network security key or WPS PIN using your remote.
Enter numbers and letters using your remote.
If you are using the standard remote, you can enter numbers by
pressing the number buttons on the remote.
To enter a letter, move the Highlight to the letter, and then select it.
You can enter numbers in the same fashion if you choose.
To display capital letters (or redisplay small letters if capital letters are
To display symbols and punctuation, select
3. When done, select
have entered a WPS PIN.
4. The product checks the wireless connection. If the connection is successful,
You are connected to the Internet. If you have any problems using online
services, please contact your Internet service provider.
Select Next, and then go to 4
If the connection fails, select Previous, repeat Step 1 and 2, carefully re-
enter your security key or WPS PIN, then repeat Steps 3 and 4. If it fails
(1) on the next page. Configure your network later through
the Network Connection sections in this manual (pages 70 and 73).
The product checks the network connection, then displays the
to the Internet. If you have any problems using online services, please contact your
Internet service provider.
message appears. Select Next. The
English - 22
if you have entered a security key or
on the "Connection Failed" screen, and then go to 6
in the product's Menu. For more information, refer to
. To redisplay letters,
You are connected