How can I change the size of
MHL charging seems slow.
There is white space on the
edge of screen.
When playing a video file,
pressing ∂, ∫, †,
on the remote do not work on
Anynet+ does not work.
I want to start Anynet+.
I want to exit Anynet+.
The message Connecting to
Anynet+ device ... appears on
Solutions and Explanations
The product only supports
The monitor supports 500mA for charging purposes (MHL 1.1). If the mobile device is
on, charging the product fully takes more time due to battery consumption. Therefore,
it is recommended turning off the mobile device for faster charging.
Even though the monitor displays 100% of the screen, since some mobile devices
transmit a downscaled image, there could be some white space on the monitor. This
is not a monitor problem but an issue caused by the downscaled image from the
mobile device. (This issue happens with HCT devices).
Some mobile devices do not support the remote control feature. If a monitor cannot
control the mobile device, it is not a monitor problem. Some applications and games
also do not support the remote control feature and this is also not a monitor problem.
Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+
You can connect only one receiver (home theatre).
Check if the Anynet+ device power cord is properly connected.
Check the Anynet+ device's Video/Audio/HDMI cable connections.
Check whether the product remote control is in product mode.
Check whether the remote control is Anynet+ compatible.
Anynet+ doesn't work in certain situations. (Searching channels, operating
or Setup, etc.)
If you have removed and then reconnected the HDMI cable, please make sure to
search devices again or turn your product off and on again.
Check if the Anynet+ device is properly connected to the product and check if the
is set to On.
menu using your remote and then select
select a menu you want.
in the Anynet+ menu.
screen using your remote and select a non-Anynet+ device.
You cannot use the remote control when you are configuring Anynet+ or switching to
a view mode.
Use the remote control after the product has completed Anynet+ configuration or has
finished switching to Anynet+.
English - 171
when you using MHL function.
is set to
in the Anynet+ setup menu.