When you turn the product on for the first time, a sequence of screens and on-screen prompts will assist you in
configuring the product's basic settings. Plug the power cord into a wall outlet, and then press the
is available only when the
To return to the previous step in the
If you are not using a cable box or satellite box, make sure you have connected the product to an aerial or cable
connection before you turn on the product. See page 20 for instructions.
If you want to configure a wired network connection during Setup, make sure you've connected a LAN cable to
your product. See page 68 for instructions. If you want to configure a wireless network connection during Setup,
make sure your wireless modem or router is on and working. See page 67 for instructions.
Mode: Select the
Home Use Mode.
Configure the network
later, select Skip.
You can set up
using the on-
Configuring the Basic Settings in Initial Setup
is set to TV. See "Changing the Input Source" (page 30).
sequence, select Previous.
screen, select the
select Next. The Network Settings screen appears.
mode is for retail environments only. If you select
some functions will not work, and the product will reset all functions to their
factory default after a certain period of time. For more information about
Demo, go to the end of this section.
To configuring your network settings, select
to 3A - Wireless Network or 3B - Wired Network on the next page.
If you do not know your network configuration information or want to configure
the settings later, or do not have a network, select Skip, and then go to 6 -
(1) on page 52.
To configure network settings later, refer to the Network Connection sections in
this manual (pages 70 and 73).
English - 21
mode using your remote, and then
using your remote, and then go
button to turn on