Getting Started
9
Time Zone
(Australia
only): Setting the your
Time Zone
10
Setup Complete
If You Want to Rerun Setup...
Menu
→
System
→
Setup
If You Want to Turn the
To set or unset
Store Demo
in the OSD, press and hold
If You Want to Reset This Feature...
Select System - Setup (Initial Setup). Enter your 4 digit PIN number. The default PIN number is "0-0-0-0". If you want to
change the PIN number, use the Change PIN function. You should do Setup (Menu → System) again at home although
you did in shop.
✎
If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which
resets the PIN to "0-0-0-0":
This step is only available when the clock mode is set to Auto.
• Auto: Set the time zone automatically.
• Manual: Set the time zone manually.
✎
If you selected Manual, you can select whether to turn DST (Daylight Savings Time)
On
or Off. (Depending on the country)
Review the Setup data, and then select
✎
The completed settings are displayed.
Store Demo
Mode
mode outside of Setup, press the volume button on the product. When you see the volume
MENUm
button on the product for 5 seconds.
→
→
→
MUTE
8
2
4
English - 24
Close
On
or Off.
→
POWER
(on).
to finish.
Need help?
Do you have a question about the LED TV MONITOR and is the answer not in the manual?