If your network requires a Dynamic IP address, you should use an ADSL modem or router that supports the
Dynamic Host Configuration Protocol (DHCP). Modems and routers that support DHCP automatically provide
the IP address, subnet mask, gateway, and DNS values your product needs to access the Internet so you do
not have to enter them manually. Most home networks use a Dynamic IP address.
Some networks require a Static IP address. If your network requires a Static IP address, you must enter the
IP address, subnet mask, gateway, and DNS values manually when you set up the network connection. To
get the IP address, subnet mask, gateway, and DNS values contact your Internet Service Provider (ISP). If you
have a Windows computer, you can also get these values through your computer.
You can use ADSL modems that support DHCP if your network requires a Static IP address. ADSL modems
that support DHCP also let you use Static IP addresses.
The Wireless Network Connection
You can connect your product to your LAN through a standard wireless router or modem.
The LAN Port on the Wall
This product supports the IEEE 802.11a/b/g and n communication protocols. Samsung recommends using IEEE
802.11n. When you play video over a network connection, the video may not play smoothly.
Most wireless network systems incorporate a security system that requires devices that access the network through an
access point or AP (typically a wireless IP Sharer - router or modem) to transmit an encrypted security code called an
Wireless IP Router
or Modem that has a
LAN Cable (Not Supplied)
English - 68