Download  Print this page

Listening Through A Receiver; Using The Arc Function - SAMSUNG LED TV MONITOR User Manual

7 series led tv monitor (mfm tv).
Hide thumbs


Table of Contents
Advanced Features
Switching between Anynet+ Devices
1. Open the
menu using your remote, and then select
2. Select
List. The
If you cannot find a device you want, select
3. Select a device, and then wait until the switch to the selected device is completed.
Device List
Switching to the selected device may take up to 2 minutes. You cannot cancel the switching operation
while switching is in progress.
If you have selected an Anynet+ device using the
Make sure to switch to an Anynet+ device using the

Listening through a Receiver

You can listen to sound through a receiver (i.e. Home Theatre) instead of the product Speaker. To listen to sound through
a receiver, go to
If your receiver supports audio only, it may not appear in the device list.
The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO
OUT (OPTICAL) port of the product.
When the receiver (i.e. Home Theatre) is set to on, you can hear sound output from the product's Optical jack.
When the product is displaying a DTV (air) signal, the product will send out 5.1 channel sound to the receiver.
When the source is a digital component such as a DVD player and it is connected to the product via HDMI, you
will hear only 2 channel sounds from the receiver.

Using the ARC function

You can listen to sound from the product through a receiver connected using an HDMI cable without connecting a
separate optical cable. To listen to sound through a receiver using the ARC function, go to
→ Receiver). Then select
Anynet+ (HDMI-CEC)
To use the ARC function, a receiver which supports the HDMI-CEC and ARC features must be connected to the
HDMI IN 2 (MHL / ARC) port.
To disable the ARC function, set the
the receiver will be blocked from receiving the signal.
Device List
screen appears.
menu appears only when you set
Anynet+ (HDMI-CEC)
to Off. Even if the product transmits the ARC signal continuously,
English - 162
to refresh the list.
Anynet+ (HDMI-CEC)
function , you cannot use the Anynet+ function.
Device List
→ Receiver). Then select
and set to On.
in the
and set to On.


Table of Contents

   Related Manuals for SAMSUNG LED TV MONITOR

This manual is also suitable for:

Syncmaster tb750

Comments to this Manuals

Symbols: 0
Latest comments: