Set the wired or wireless network connection to use various Internet services such as
perform software upgrades.
Automatic Wired Network Setup
You can configure your product's wired network connection automatically when connecting your product to a network
that supports DHCP.
When connecting LAN cable, the screen pop-up appears directly to set wired network.
To set up your product's wired network connection automatically, follow these steps:
1. Go to the
2. Select Start. The network test screen appears and verifies the network connection.
3. When the connection has been verified, the
online services, please contact your Internet service provider.
If the connection process fails, check the LAN port connection.
If the automatic process cannot find the network connection values or if you want to set the connection
manually, go to the next section, "Manual Network Setup."
Setting up a Wired Network
You are connected to the Internet. If you have any problems using
English - 70
message appears. Select OK.