Related Manuals for Samsung HG40ED890U
Summary of Contents for Samsung HG40ED890U
- Page 1 LED TV Installation manual Thank you for purchasing Samsung product. To receive more service, please register your product at www.samsung.com/register Model Serial No.
-
Page 2: Operational Modes
SBB/STB. If the TV is in ONLINE mode, it stops receiving IR(Samsung remote) commands and acts according to interface protocol. Stand-Alone: If SBB/STB is not identified, the TV should be switched to STAND-ALONE mode with restricted operation. -
Page 3: Table Of Contents
Viewing the Connection Panel ........................7 y TV Controller ............................10 y Viewing the Remote Control ........................11 y Samsung Smart Control ........................... 13 y Connecting the TV with SBB ........................16 y Connecting the Bathroom Speakers ......................17 y Connecting the MediaHub HD ......................... -
Page 4: Accessories
✎ The items’ colour and shapes may vary depending on the model. • Remote Control & Batteries (AAA x 2) • Power Cord / Data Cable • Samsung Smart Control & Batteries (AA x 2) • Owner’s Instructions Safety Guide (Not available in all locations) • Quick Set up Guide... -
Page 5: Installing The Led Tv Stand
Installing the LED TV Stand The 32” and larger LED TVs have swivel stands. You can set these stands so that the TVs swivel 20 degrees left and right or 90 degrees left and right. Stand Components When installing the stand, use the provided components and parts. B 1 EA 1 EA x8 (M4 X L14) - Page 6 x4 (M4 X L14) ✎ Progress the assembly of screw in the manual’s order. ✎ NOTE • Make sure to distinguish between the front and back of each component when assembling them. • Make sure that at least two persons lift and move the TV. English...
-
Page 7: Viewing The Connection Panel
Viewing the Connection Panel VOL-CTRL AUDIO IN HDMI IN 3 (ARC) HDMI IN 1 (DVI) HDMI IN 2 DIGITAL AUDIO OUT (OPTICAL) ✎ Whenever you connect an external device to your TV, make sure that power on the unit is turned off. ✎... -
Page 8: Display Modes
Connect to a wired LAN using CAT 7 cable. ANT IN (SATELLITE), (AIR/CABLE) – To view television channels correctly, the TV must receive a signal from one of the following sources: – An outdoor antenna / A cable television system DATA –... - Page 9 ✎ Optimal resolution is 1920 X 1080 @ 60 Hz. Pixel Clock Horizontal Frequency Vertical Frequency Sync Polarity Frequency Mode Resolution (KHz) (Hz) (H / V) (MHz) 720 x 400 31.469 70.087 28.322 640 x 480 35.000 66.667 30.240 832 x 624 49.726 74.551 57.284...
-
Page 10: Tv Controller
TV Controller TV Controller is a multi directional button that helps navigate without using the remote control. ✎ Some functions which require a PIN code may not be available. ✎ The product colour and shape may vary, depending on the model. ✎... -
Page 11: Viewing The Remote Control
Viewing the Remote Control ✎ This remote control has Braille points on the Power , Channel , and Volume buttons and can be used by visually impaired persons. SOURCE Display and select available video Turns the TV on and off. sources. - Page 12 Installing batteries (Battery size: AAA) ✎ NOTE • Use the remote control within 7m of the TV. • Bright light may affect the performance of the remote control. Avoid using nearby special fluorescent light or neon signs. • The colour and shape may vary depending on the model. • Remote control button 'HOME' &...
-
Page 13: Samsung Smart Control
Changes the channel. Changes the volume. – Touchpad: Place a finger on the touch pad and move the Samsung Smart Control. The pointer on the screen moves in the direction and as much as the Samsung Smart Control is moved. Press the touchpad to run the focused item. -
Page 14: Reconnecting Samsung Smart Control
Pairing the Samsung Smart Control To control the TV with Samsung Smart Control, you need to pair Samsung Smart Control to the TV via Bluetooth. Pair Samsung Smart Control to the TV. – Samsung Smart Control can only be paired to a single TV. -
Page 15: Using The Tv By Moving The Samsung Smart Control
<Low battery Alarm Icon> Using the TV by Moving the Samsung Smart Control The Samsung Smart Control has a motion sensor (gyro sensor) that allows you to easily control the TV by holding and moving the Samsung Smart Control. After placing a finger on the touchpad, a pointer appears on the screen. Hold and move the Samsung Smart Control. The pointer moves the same way the Samsung Smart Control is moved. -
Page 16: Connecting The Tv With Sbb
Connecting the TV with SBB TV Rear Panel ETH MODEM Data Cable DIGITAL DIGITAL AUDIO OUT AUDIO OUT (OPTICAL) (OPTICAL) 1. Connect the DATA jack of the TV to the [ETH MODEM] jack of the STB (SBB) with the Data cable. ✎... -
Page 17: Connecting The Bathroom Speakers
Connecting the Bathroom Speakers You can connect the Bathroom Speakers using the following method. Connecting through the Variable Output (available without an external amplifier) ¦ TV Rear Panel Speaker VOL-CTRL VOL+ Volume Control Box VOL- AUDIO IN AUDIO IN 1. Connect the VARIABLE AUDIO OUT port of the TV to the Bathroom Wall Speakers of the hotel. - Page 18 Audio Loop In ¦ An additional Headphone Box can be installed on a bed or business desk for added convenience. The installation procedures are given below. • Detailed Drawing of the Headphone Box. TV Rear Panel HEADPHON BOX Headphone Box Shield wire TV Headphones jack Red Wire (Audio-R)
-
Page 19: Connecting The Mediahub Hd
Connecting the MediaHub HD Output to any external source connected to MediaHub HD on the hotel desk. MediaHub HD Rear HDMI RS/232 TV Rear Panel 1 RS-232 Data Cable VOL-CTRL VOL-CTRL AUDIO IN AUDIO IN HDMI IN 3 (ARC) 2 HDMI cable HDMI IN 1 (DVI) HDMI IN 2... -
Page 20: Connecting The Rjp (Remote Jack Pack)
5. Connect the port of the TV and the RS/232 port of the RJP. ✎ The RJP (Remote Jack Pack) compatible with this Samsung TV is TeleAdapt TA-7610, TA-7650 (HD) and TA-7660 (HD Plus). • RJP (Remote Jack Pack): RJP stands for Remote Jack Pack. The RJP is a hardware module that has different Audio Video inputs (A/V, Audio, PC and HDMI) and corresponding outputs. - Page 21 • The RJP can be returned to the factory default settings by pressing the A/V and HDMI buttons simultaneously for 10 seconds. All LEDs blink 5 times to acknowledge that this has been finished. • The RJP will automatically turn off any LEDs after 5 minutes to avoid unnecessary light pollution in the hotel room. The LEDs that were turned off will turn on again if the guest touches any of the buttons and the 5 minute timer will restart.
-
Page 22: Connecting To A Common Interface Slot (Your Tv Viewing Card Slot)
Connecting to a COMMON INTERFACE slot (Your TV viewing Card Slot) ✎ Scenario 1: When no inputs are connected. Attaching the CI Card Adapter Attach the adapter as shown side. ✎ To install the CI CARD Adapter, please remove the sticker attached to the TV. -
Page 23: Setting The Hotel Option Data
• Standalone mode : TV works alone, without an SI STB or SBB. • Interactive mode : Samsung / 2M / Locatel / VDA / VDA-S / Acentic / Sustinere / Quadriga / ETV / IBahn / Magilink / Otrum / Siemens / Amino / MDC / Enseo... - Page 24 Hotel TV Function Description Category Item Initial value When there is a mismatch between the data in the channel map and the transmitted data, the TV autotunes the channels to restore the data/parameters in the channel map. Channel Rescan • ON: When Channel Rescan Message is ON, The OSD showing that the channels are Message being rescanned will be displayed to Hotel Guests.
- Page 25 Hospitality Logo DL • BMP or AVI files only. • Max file size : BMP - 960 X 540. AVI - 30MB. • The file can only be named samsung.bmp or samsung.avi. Logo Display Time Set the logo display time (3/5/7 Seconds). Clone TV to USB Clone the current TV option values to a USB memory device.
- Page 26 Sound Bar Out You must connect the Sound Bar to hear the sound. OFF: Sound will come out through TV speakers normally. Display the web site of related Samsung service center, software version, and Mac Contact Samsung address information. When the TV is in standby mode, you can configure the settings of external LED.
- Page 27 Welcome Message ¦ The welcome message is used to display custom messages on the TV every time TV is turned on by a Guest in Hotel room. – Welcome message settings are found in the Hotel Option Menu. – Welcome message should be ON in order to display the message on power-on. Hospitality Mode Standalone Network...
- Page 28 Logo File Format – The TV supports only BMP and AVI format. – The file name must be samsung.bmp or samsung.avi. – The maximum resolution of the BMP format is 960 x 540. – The maximum file size for AVI format is 30MB.
-
Page 29: Usb Cloning
USB Cloning ¦ USB Cloning is used to download user-configured settings (Picture, Sound, Input, Channel, Setup, and Hotel Setup) from one TV set and upload them to other TV sets. All the user-defined settings from the TV (Master Set) can be copied to the USB device. • Cloning from TV to USB: This copies stored data from the TV set to the USB device. - Page 30 Change PIN Speaker Settings General Sound Additional Settings Game Mode DTV Audio Level BD Wise Audio Format Sound Feedback Audio Delay Boot Logo Dolby Digital Comp Samsung Instant On Auto Volume Anti Flicker Reset Sound Anynet+(HDMI-CEC) DivX® Video On Demand English...
- Page 31 Plug & Play ¦ Hotel Plug & Play automatically performs Hotel mode selection, Country Setup, Clock Setup and Picture mode Setup. – Hotel Plug & Play is available only one time when power is first turned ON. – This is available after first setting up the TV and transferring Clone TV data to a USB drive. –...
- Page 32 – When Standalone Plug & Play is selected from “Easy Set Up” OSD, “Select Menu Language” OSD is displayed. – Initial Highlight : English – Display time: OSD timeout and operation are the same as Samsung's consumer TV models. – If the ENTER button is pressed, “Select Area”...
- Page 33 Multi Code Remocon ¦ Multi Code Remocon is a special transmitter which is designed to control each TV with one remote. This is useful where there is more than one TV in a location, such as in a hospital the set ID number is displayed in the source osd.
- Page 34 CH Bank Editor (Smoovie TV Only) ¦ Channel Bank Editor edits channels, with 3 different Bank Options. Depending on the Bank card, there are specific channels Hotel customers can enjoy. Setting the CH Bank Editor under Stand-alone Mode → → →...
- Page 35 5. Edit the channel bank like below example. a. BANK1 (Free channel): Select the channel that will be used when remote doesn’t have any card. b. BANK2 (Family Card - Green): Select the channel that will be used when remote has a GREEN CARD. c.
- Page 36 Channel Editor ¦ Channel Editor edits channel number a and name. – Use Channel Editor to sort the channels as user-desired channel numbers. Hospitality Mode Standalone Network SI Vendor Widget Solution Power On System Channel Menu OSD Clock Music Mode Remote Jack Pack Channel Editor External Source...
- Page 37 Smoovie On sequence Smovie TV used (Air/ Cable ) Mixed Channel Map On (Air and Cable both used) Only Air or Cable used Only Air or Cable used Step If the tv starts with Hotel P&P If P&P already done If the tv starts with Hotel P&P If P&P already done Do the P&P, except channel...
-
Page 38: Channel List
Channel List You can view channel information, All, TV, Radio, Data/Other, Analogue or Favourites 1-5. ✎ When you press the CH LIST button on the remote control, Channel List screen displays immediately. Contents Home Channel List Guide AllShare Play Schedule Manager Source Return * The displayed image may differ depending on the model. - Page 39 How to use Schedule Viewing in Channel List (digital channels only) When you set the Schedule Viewing in Channel List, you can only set the programme in Programme View. 1. Press the CH LIST button, then select a desired digital channel. 2.
- Page 40 Using Option Menu t Set each channel using the menu options (Edit Favourites, Lock/Unlock, Delete, Deselect, Select All). 1. Press the TOOLS button in Channel List screen, then select the Edit Mode. A check box appears to the left of the channel.
- Page 41 My Channel ¦ Determines the country and genre for the channels provided by the hotel, and if the user selects a country and genre, shows the corresponding channels. • You must select the country first, or you can not set a genre. • If you select the genre without adding any channels, the channel list displays all of the available channels.
- Page 42 ✎ NOTE • This section describes the layout of the Front UI that appears when the TV is turned on. (Factory Mode > Genre Mode: Enable) • The genre is a sub-list for each country. • The broadcast screen that was being displayed the last memorial channel. –...
- Page 43 Highlight Interaction [Country Items] • This page is only to indicate possible interactions. It may not be exactly identical to actual screens. ✎ NOTE • Users can navigate the items in each country & genre list by pressing the up or down remote control keys. • Circular navigation is supported.
- Page 44 Highlight Interaction [Default Genre] • This page is only to indicate possible interactions. It may not be exactly identical to actual screens. My Channel My Channel Current status : All Country/Sports Current status : All Country/Sports Country Genre Country Genre ▲...
- Page 45 Mode Change Interaction 1 (1/2) • This page is only to indicate possible interactions. It may not be exactly identical to actual screens. My Channel My Channel Current status : All Country/Sports Current status : All Country/Sports Country Genre Country Genre ▲...
- Page 46 Mode Change Interaction 1 (2/2) • This page is only to indicate possible interactions. It may not be exactly identical to actual screens. My Channel Current status : All Country/Sports Country Genre ▲ All Country Austria News Genre Mode change to Austria/News. Info Belgium (Dutch) Radio...
- Page 47 Mode Change Interaction 1 (1/2) • This page is only to indicate possible interactions. It may not be exactly identical to actual screens. My Channel My Channel Current status : All Country/Sports Current status : All Country/Sports Country Genre Country Genre ▲...
- Page 48 Power On Scenario [Last Memory] • This page is only to indicate possible interactions. It may not be exactly identical to actual screens. POWER Current Status : Austria / News Power Off • Current Genre Mode : All Country / Sports POWER My Channel Current status : All Country/Sports...
- Page 49 Genre Editor: This configures the genres of each of the hotel TV channels. • This can be used through the Hotel Menu (Factory). • Supported genres include News, Radio, Entertainment, Sports and Hotel. • More than one genre can be selected for each channel at the same time. Country Editor (Channel Editor): This is the editor that configures the country for each of the hotel TV channels.
- Page 50 Elements Name Description • When the user enters this screen, the currently selected default item is highlighted. • The Country Icon + Category Name are provided. (If the highlight is in the Main Frame, only the icon is displayed.) • Moving the highlight –...
- Page 51 ✎ NOTE • This is a definition of the Tools menu in the Left Frame Category. • Only the Info item for each Register/Country is provided. Elements Category Tools menu Descriptions Registered, Country Information Registered Channels. The number of channels of each country. • The items are displayed without ‘Channel’.
- Page 52 ✎ NOTE • This is the component for when there are no channels registered to the country category. Elements Description Description The message is displayed when the currently selected country does not contain any items. Main Frame [Channel Browser] English...
- Page 53 Key Guide Button Action Nav. Help CH UP/DOWN Moves the page. Page ENTER Selects or enters the corresponding Channel Browser area. Select RETURN Returns to the previous step (Factory Mode). Return UP/DOWN Moves the highlight up or down. (No Guide) RIGHT Moves the highlight to the Channel Browser area.
- Page 54 Channel Common Elements [+ Icon-method] Channel list representation rules Construction Standard Item • Check Box + Status Icon + Digital Channel Number + Channel Name Digital channels • Channel number representation format: ###-### (The channel number is represented by ‘-’.) ATSC • Check Box + Analog Icon + Analog Channel Number + Channel Name Analog channels • Channel number representation format: ### (‘-’...
- Page 55 Add to Countries / Edit Countries (1/2) • Channel Manager > Browser > Tools > Add to Countries Key Guide Button Action Nav. Help ENTER Selects the highlighted item. Enter RETURN Cancels and returns to the previous screen (Tools). Return UP/DOWN Moves the highlight over country items.
- Page 56 Elements Name Description • If there are no channels that have been registered to the country list in the Add to Countries selected channels, “Add to Countries” is displayed as the title. Window • A check box is displayed depending on whether the country that was selected when entering the screen is registered or not.
- Page 57 Key Guide Button Action Nav. Help ENTER Selects the highlighted item. Enter RETURN Cancels and returns to the previous screen (Tools). Return UP/DOWN Moves the highlight over country items. Move LEFT/RIGHT Moves the highlight. Move INFO TOOLS Closes the current window and displays the ‘Tools’ menu. (No Guide) EXIT Cancels and returns to the previous step (Factory Mode).
- Page 58 Key Guide Button Action Nav. Help ENTER Applies the changes and closes the window. Enter RETURN Cancels and returns to the previous screen (Tools). Return Changes the channel number of the selected channel. Adjust Enters a digit. Number INFO Closes the current window and displays the ‘Tools’ menu. (No Guide) TOOLS EXIT...
- Page 59 Edit the Channel Number [External Input] (3/3) • Channel Manager > Browser > Tools > Edit Channel Number Key Guide Button Action Nav. Help If a user presses the button, the channel number is initialized. Reset ENTER Applies the changes and closes the window. Enter RETURN Cancels or returns to the previous screen (Tools).
- Page 60 Elements Name Description • The channel number area. – Both the numeric keys and the Up/Down keys are supported. – If no value is allocated, as many ‘-’ are displayed as the number of digits. ▲ ▲ ▲ Channel Number Area →...
- Page 61 Elements Name Description Channel Name Edit Window • The cursor and the character that are currently being entered are in the same colour as the highlight. Channel Name • When the maximum number of characters is reached, the cursor disappears. Keyboard • For a detailed scenario, refer to the keypad design document. Tools [Edit Mode] Edit Mode Content Highlight (when the number of the checked item is 0 or 1)
- Page 62 CH Banner [when a channel number is allocated to an external input] ✎ NOTE • The TV channel banner specifications are applied. • When there is an unsupported item or there is no corresponding information, the item values are not displayed. • The channel name is represented as the ‘external input name’.
- Page 63 • Samsung Sound-Bars and Hospitality TV – Use Samsung Sound-Bars and hospitality TVs support the ARC feature in HDMI. If you connect a compatible Samsung Sound-Bar to a compatible Samsung hospitality TV using a single HDMI cable, guests can listen to theTV’s sound through the Sound-Bar.
- Page 64 Security mode ¦ Design Specifications • This is to restrict some functions such as TTX and external source (HDMI, USB) input in specific facilities such as a correctional facility. • The Security menu is password-protected. Access to the Security menu is denied without the password. • Security Setting –...
-
Page 65: Installing The Wall Mount
Contact a technician for assistance when installing the wall mount bracket. We do not advise you to do it yourself. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you select to install the TV on your own. -
Page 66: Securing The Tv To The Wall
Anti-theft Kensington Lock The Kensington Lock is not supplied by Samsung. It is a device used to physically fix the system when using it in a public place. The appearance and locking method may differ from the illustration, depending on the manufacturer. -
Page 67: Specifications
Storage Temperature -20°C to 45°C (-4°F to 113°F) Storage Humidity 5% to 95%, non-condensing Stand Swivel (Left / Right) 20˚ / 60˚ / 90˚ Model Name HG40ED890U HG48ED890U Screen Size (Diagonal) 40.0 inches 47.6 inches Sound (Output) 10W x 2... -
Page 68: Dimensions
Dimensions Front view / Side view (Unit: mm) HG40ED890U 917.7 886.7 449.7 535.6 587.7 55.7 66.8 271.7 HG48ED890U 1087.1 1056.1 594.9 630.8 683.4 56.3 67.4 277.7 HG55ED890U 1242.6 1211.6 682.4 718.3 770.5 56.3 67.4 277.7 HG65ED890U 1463.4 1430.4 805.5 844.2 897.0... - Page 69 Base Stand detail (Unit: mm) HG40ED890U 759.9 271.7 45.7 HG48ED890U 859.9 277.7 145.4 HG55ED890U HG65ED890U 999.9 295.1 206.5 ✎ NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing installation of your TV. Not responsible for typographical or printed errors.
- Page 70 Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Country Web Site Customer Care Centre AUSTRIA 0800-SAMSUNG (0800-7267864) www.samsung.com/at/support BELGIUM 02-201-24-18 www.samsung.com/be/support (Dutch) www.samsung.com/be_fr/support (French) BOSNIA 055 233 999 www.samsung.com/support...