Recording; Listening Through A Receiver (Home Theater) - Samsung 6000 SERIES User Manual

TV Remote Control Buttons Available in Anynet + Mode
Device Type Operating Status
After switching to the device, when the menu
of the corresponding device is displayed on
Anynet + Device
the screen.
After switching to the device, while playing a
file
Device with built-in After switching to the device, when you are
Tuner watching a TV program
Audio Device When Receiver is activated
N The Anynet + function only works when the active source on the TV remote control is set to TV.
N The J button works only while in the recordable state.
N
You cannot control Anynet + devices using the buttons on the TV. You can control Anynet + devices only using the TV remote
control.
N
The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet + device.
N The Anynet + functions do not operate with other manufacturers' products.
N The K, G operations may differ depending on the device.
¦

Recording

You can make a recording of a TV program using a Samsung recorder.
1. Press the TOOLS button. Press the ENTERE button to select Anynet + (HDMI-CEC).
2. Press the or button to select Recording Immediately and press the ENTERE
button. Recording begins.
N
When there is more than one recording device
When multiple recording devices are connected, the recording devices are listed.
Press the or button to select a recording device and press the ENTERE
button. Recording begins.
N
When the recording device is not displayed select Device List and press the Red
button to search devices
3. Press the EXIT button to exit.
N
You can record the source streams by selecting Recording: (device_name).
N Pressing the J button will record whatever you are currently watching. If you are watching video from another device,
the video from the device is recorded.
N
Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect an
antenna to a recording device, refer to the recording device's users manual.
¦

Listening through a Receiver (Home Theater)

You can listen to sound through a receiver instead of the TV speaker.
1. Press the TOOLS button. Press the ENTERE button to select Anynet + (HDMI-CEC).
2. Press the or button to select Receiver. Press the
3. Press the EXIT button to exit.
N
If your receiver supports audio only, it may not appear in the device list.
N
The receiver will work when you have properly connected the optical in jack of the
receiver to the DIGITAL AUDIO OUT (OPTICAL) jack of the TV.
N
When the receiver (home theater) is set to On, you can hear sound output from
the TV's Optical jack. When the TV is displaying a DTV(air) signal, the TV will send
out 5.1 channel sound to the Home Theater receiver. When the source is a digital component such as a DVD and is
connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver.
N
If there is a power interruption to the TV when the Receiver is set to On (by disconnecting the power cord or a power
failure), the Speaker Select may be set to External Speaker when you turn the TV on again.
Available Buttons
Numeric buttons
/ / / / ENTERE buttons
Color buttons / EXIT button
K(Backward search) / G(Forward search) /
L(Stop) / H(Play) / I(Pause)
z button
y / MUTE button
or button to select On or Off.
English - 57
U E R
U E R