Samsung UN28H4000 User Manual

LED TV
user manual
Still image warning
Figures and illustrations in this User Manual are provided for reference
only and may differ from actual product appearance. Product design Avoid displaying still images (such as jpeg picture files) or still image
and specifications may be changed without notice. elements (such as TV channel logos, panorama or 4:3 image format, stock or
news bars at screen bottom etc.) on the screen. Constant displaying of still
pictures can cause ghosting of LED screen, which will affect image quality. To
reduce risk of this effect, please follow below recommendations:
Important Warranty Information Regarding Television
y Avoid displaying the same TV channel for long periods.
Format Viewing
y Always try to display any image on full screen, use TV set picture format
✎
Wide screen format LED Displays with aspect ratios of 16:9 (the ratio
menu for best possible match.
of the screen width to screen height) are primarily designed to display
y Reduce brightness and contrast values to minimum required to achieve
wide screen format full-motion video. The images displayed on them
desired picture quality, exceeded values may speed up the burnout
should primarily be in the wide screen 16:9 ratio format, or expanded
process.
to fill the screen if your model offers this feature and the images are
constantly moving. Displaying stationary graphics and images on y Frequently use all TV features designed to reduce image retention and
screen, such as the dark sidebars on non- expanded standard format screen burnout, refer to proper user manual section for details.
television video and programming, should be limited to no more than
Securing the Installation Space
5% of the total television viewing per week. Additionally, viewing
other stationary images and text such as stock market crawls, video
Keep the required distances between the product and other objects (e.g. walls) to
game displays, station logos, web sites or computer graphics and
ensure proper ventilation.
patterns, should be limited as described above for all televisions.
Failing to do so may result in fire or a problem with the product due to an increase in
Displaying stationary images that exceed the above guidelines can
the internal temperature of the product.
cause uneven aging of LED Displays that leave subtle, but permanent ✎
When using a stand or wall-mount, use parts provided by Samsung
burned-in ghost images in the LED picture. To avoid this, vary the
Electronics only.
programming and images, and primarily display full screen moving
• If you use parts provided by another manufacturer, it may result in a problem
images, not stationary patterns or dark bars. On LED models that
with the product or an injury due to the product falling.
offer picture sizing features, use these controls to view different
✎
The appearance may differ depending on the product.
formats as a full screen picture. Be careful in the selection and
✎
Be careful when you contact the TV because some parts can be somewhat
duration of television formats you use for viewing. Uneven LED aging
hot.
as a result of format selection and use, as well as burned-in images,
are not covered by your Samsung limited warranty.
Installation with a stand. Installation with a wall-mount.
y SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY
STATEMENT
4inches
Subject to the requirements, conditions, exclusions and limitations of the
4inches 4inches
4inches
original Limited Warranty supplied with Samsung Electronics (SAMSUNG)
products, and the requirements, conditions, exclusions and limitations
contained herein, SAMSUNG will additionally provide Warranty Repair
Service in the United States on SAMSUNG products purchased in Canada,
and in Canada on SAMSUNG products purchased in the United States, for the
warranty period originally specified, and to the Original Purchaser only.
Contact SAMSUNG WORLD WIDE
The above described warranty repairs must be performed by a SAMSUNG
Authorized Service Center. Along with this Statement and the Original If you have any questions or comments relating to Samsung products,
Limited Warranty Statement, a dated Bill of Sale as Proof of Purchase must
please contact the SAMSUNG customer care center.
be presented to the Service Center. Transportation to and from the Service
Center is the responsibility of the purchaser. Conditions covered are limited
Country CANADA
only to manufacturing defects in material or workmanship, and only those
encountered in normal use of the product. Exclusions include, but are not
limited to, any originally specified provisions for in-home or on-site services, Samsung Electronics Canada
minimum or maximum repair times, exchanges or replacements, accessories, Inc. 2050 Derry Road West,
Address
options, upgrades, or consumables.
Mississauga, Ontario L5N
For the location of a SAMSUNG Authorized Service Center, please call toll-free:
0B9 Canada
– In the United States : 1-800-SAMSUNG (1-800-726-7864)
Customer Care
– In Canada : 1-800-SAMSUNG 1-800-SAMSUNG (726-7864)
Center
www.samsung.com/ca/
support (English)
Web Site
www.samsung.com/ca_fr/
support (French)
© 2016 Samsung Electronics Co., Ltd. All rights reserved.
-00
- 1 -

Remote Control

Displays and selects the available video
sources.
Turns the TV on and off. Turns the remote control light on or off.
When on, the buttons become illuminated
for a moment when pressed. (Using the
remote control with this button set to On
will reduce the battery usage time.)
Press to directly access to channels.
Press to select additional channels (digital) being
Returns to the previous channel.
broadcasted by the same station. For example,
to select channel '54-3' , press '54' , then press '-'
and '3' . Cuts off the sound temporarily.
Adjusts the volume. Changes channels.
Displays the channel list on the screen.
Displays the main on-screen menu.
Views the Media Play. MEDIA.P SLEEP
Automatically shuts off the TV at a preset
time.
Quickly select frequently used functions.
Displays information on the TV screen.
ENTERE and Direction buttons.
Selects the on-screen menu items and changes
the values seen on the menu.
Exit the menu.
Returns to the previous menu.
Use these buttons according to the
direction on screen.
E-MANUAL: Not available.
P.SIZE: Choose the picture size.
Use these buttons in a specific feature.
CC: Controls the caption decoder.
✎
The button names above may differ from the actual names.
✎
Some buttons on the remote control may not be available.
✎ This remote control has Braille points on the Power, Channel and Volume buttons and can be used by visually impaired persons.
Display Modes (HDMI/DVI Input) Installing batteries (Battery size: AAA)
Optimal resolution: 1366 x 768@60Hz
Pixel Clock
Horizontal Vertical Sync Polarity
Mode Resolution Frequency 1366 x 768
Frequency (KHz) Frequency (Hz) (H / V)
(MHz)
640 x 350 31.469 70.086 25.175 +/-
c
IBM
720 x 400 31.469 70.087 28.322 -/+ c
640 x 480 35.000 66.667 30.240 -/- c
MAC 832 x 624 49.726 74.551 57.284 -/- c
1152 x 870 68.681 75.062 100.000 -/-
640 x 480 31.469 59.940 25.175 -/- c
640 x 480 37.861 72.809 31.500 -/- c
640 x 480 37.500 75.000 31.500 -/- c
✎
NOTE
800 x 600 37.879 60.317 40.000 +/+ c
800 x 600 48.077 72.188 50.000 +/+ c
• Use the remote control within 23 feet from TV.
800 x 600 46.875 75.000 49.500 +/+ c
• Bright light may affect the performance of the remote control. Avoid
1024 x 768 48.363 60.004 65.000 -/- c
use when nearby fluorescent lights or neon signs.
1024 x 768 56.476 70.069 75.000 -/- c
1024 x 768 60.023 75.029 78.750 +/+ c The Color and shape may vary depending on the model.
•
VESA DMT 1152 x 864 67.500 75.000 108.000 +/+
1280 x 720 45.000 60.000 74.250 +/+ c
1280 x 800 49.702 59.810 83.500 -/+
1280 x 1024 63.981 60.020 108.000 +/+
1280 x 1024 79.976 75.025 135.000 +/+
1366 x 768 47.712 59.790 85.500 +/+ c
1440 x 900 55.935 59.887 106.500 -/+
1600 x 900RB 60.000 60.000 108.000 +/+
1680 x 1050 65.290 59.954 146.250 -/+
1920 x 1080 67.500 60.000 148.500 +/+
- 5 - - 5 -
Important Safety Instructions
Warning! Important Safety Instructions
(Please read the Safety Instructions before using your TV.)
CAUTION
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE.
REFER ALL SERVICING TO QUALIFIED PERSONNEL.
This symbol indicates that high voltage is present inside.
It is dangerous to make any kind of contact with any
internal part of this product.
This symbol indicates that this product has included
important literature concerning operation and
maintenance.
• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this apparatus and to
protect it from overheating, these slots and openings must never be blocked or covered.
✎
Do not place this apparatus in a confined space, such as a bookcase or built-in cabinet, unless proper ventilation is provided.
✎
Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight.
✎
Do not place vessels (vases etc.) containing water on this apparatus, as this can result in a fire or electric shock.
• Do not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming
pool, etc.). If this apparatus accidentally gets wet, unplug it and contact an authorized dealer immediately.
• This apparatus uses batteries. In your community, there might be environmental regulations that require you to dispose of these batteries properly. Please
contact your local authorities for disposal or recycling information.
• Do not overload wall outlets, extension cords, or adaptors beyond their capacity, since this can result in fire or electric shock.
• Power-supply cords should be placed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to
cords at the plug end, at wall outlets, and at the point where they exit from the appliance.
• To protect this apparatus from a lightning storm, or when left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect
the antenna or cable system. This will prevent damage to the set due to lightning and power line surges.
• Before connecting the AC power cord to the DC adaptor outlet, make sure that the voltage designation of the DC adaptor corresponds to the local electrical
supply.
• Never insert anything metallic into the open parts of this apparatus. This may cause a danger of electric shock.
• To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus.
• Be sure to plug in the power cord until it is firmly seated. When unplugging the power cord from a wall outlet, always pull on the power cord's plug. Never
unplug it by pulling on the power cord. Do not touch the power cord with wet hands.
• If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an
authorized dealer or service center.
• Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of time (especially when
4inches children, elderly, or disabled people will be left alone in the house).
✎
Accumulated dust can cause an electric shock, an electric leakage, or a fire by causing the power cord to generate sparks and heat or by causing
4inches
the insulation to deteriorate.
• Be sure to contact an authorized Samsung service center for information if you intend to install your TV in a location with heavy dust, high or low
temperatures, high humidity, chemical substances, or where it will operate 24 hours a day such as in an airport, a train station, etc. Failure to do so may lead
4inches
to serious damage to your TV.
• Use only a properly grounded plug and wall outlet.
✎
An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)
• To turn off this apparatus completely, disconnect it from the wall outlet. To ensure you can unplug this apparatus quickly if necessary, make sure that the wall
outlet and power plug are readily accessible.
U.S.A • Store the accessories (batteries, etc.) in a location safely out of the reach of children.
• Do not drop or strike the product. If the product is damaged, disconnect the power cord and contact a Samsung service center.
Samsung Electronics
• To clean this apparatus, unplug the power cord from the wall outlet and wipe the product with a soft, dry cloth. Do not use any chemicals such as wax,
America, Inc. 85 Challenger
benzene, alcohol, thinners, insecticide, air fresheners, lubricants, or detergents. These chemicals can damage the appearance of the TV or erase the printing
Road Ridgefield Park, NJ
on the product.
07660
• Do not expose this apparatus to dripping or splashing.
• Do not dispose of batteries in a fire.
1-800-SAMSUNG (726-7864)
• Do not short-circuit, disassemble, or overheat the batteries.
• There is danger of an explosion if you replace the batteries used in the remote with the wrong type of battery. Replace only with the same or equivalent type.
www.samsung.com/us/
support
• WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES AND OTHER ITEMS WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT
ALL TIMES.
• Use care when touching the TV after it has been on for some time. Some parts can be warm to the touch.
- 2 -
Screen Fit: Displays the full image without any cut-off when your TV is
The On Screen Menus
inputting HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) HD
signals.
Your TV has two kinds of menus, the Main menu and the various Tools menus. ✎
HD (High Definition) has a 16:9 aspect ratio and 1080i/1080p
The Main menu gives you access to most or all of the menu options available
(1920x1080) or 720p (1280x720) resolution.
on your TV. The Tools menus display a selected number of frequently used
✎ You can adjust and store settings for each external device you have
menu options that change depending on the screen you are viewing. A Tools
connected to an input on the TV. Picture Sizes available by Input
menu symbol (T) in the lower right side of the screen indicates that a Tools
Source are listed below:
menu is available.
Custom: Magnifies or shrinks 16:9 pictures vertically and/or horizontally. A
The Main menu has seven primary categories:
magnified or shrunk picture can be moved left, right, up, and down.
y Picture y Input
y Sound y Application Input Source
ATV, AV, Component (480i, 480p)
y Channel y Support
DTV (1080i, 1080p), Component (1080i,
y Setup
1080p), HDMI (720p, 1080i, 1080p)
To view the Main menu, press the MENU button on your remote. To view a
Tools menu, press the TOOLS button on your remote. ■ Digital Clean View (Off / Low / Medium / High / Auto) : If the broadcast signal
received by your TV is weak, you can activate the Digital Clean View feature to
✎ The menu options that appear in the Main menu depend on the Source
reduce any static and ghosting that may appear on the screen.
you have selected. For example, if you have selected the HDMI
✎
source, the Channel category will not appear. To see the Channel When the signal is weak, try all the Digital Clean View options until the
category, you must first select TV in the Source List. TV displays the best picture.
■ HDMI Black Level (Normal / Low) : For HDMI signals, select the black level to
The Menu options are presented below, arranged by Main menu categories.
adjust the screen depth. Low make blacks look darker.
( t )
A Tools button symbol next to an option name indicates the
✎
Available only in HDMI mode (RGB signals).
option is also available in one of the Tools menus.
■ Film Mode (Off / Auto1 / Auto2) : Sets the TV to automatically sense and process

Picture Menu

film signals from all sources and adjusts the picture for optimum quality.
✎ Available in ATV, DTV (interlace), AV, COMPONENT (480i / 1080i) and
HDMI (480i / 1080i).
Mode t
■ Motion Lighting (Off / On): When on, the TV automatically dims the screen's
Select your preferred picture mode.
backlights when full brightness is not needed - for example when the TV is
✎ displaying dark scenes - to reduce power consumption. The backlights are
When your TV is connected to a PC, you can only select Entertain and Standard.
returned to full brightness when the TV displays bright scenes.
■ Dynamic: Brightens the screen. Suitable for a bright room.
Picture Off
■ Standard: Suitable for normal room brightness.
■ Movie: Darkens the screen, making it less glary. Suitable for watching movies in a The screen is turned off but the sound remains on. Press any button except
darkened room. the power key or volume button to turn on the screen.
■ Entertain: Sharpens the picture. Suitable for games.
Picture Reset
✎ Only available when the TV is connected to a PC.
■ Picture Reset (Reset Picture Mode/Cancel): Resets the picture settings to
Backlight / Contrast / Brightness / Sharpness / Color / Tint (G/R)
their factory defaults.
■ Backlight: Adjusts the brightness of the screen by adjusting the brightness of the
individual pixels.

Sound Menu

■ Contrast: Increases or decreases the contrast between dark and light areas of the
picture.
Mode t
■ Brightness: Adjusts the brightness of the screen. Not as effective as Backlight.
■ Sharpness: Sharpens or dulls the edges of objects. ■ Standard: Selects the normal sound mode.
■ Color: Adjusts the color saturation. The higher the Color setting, the more intense ■ Music: Emphasizes music over voices.
the color. Low settings remove color and the picture becomes black, white, and gray. ■ Movie: Provides the best sound for movies.
■ Tint (G/R): Adjusts the amount of green and red in the picture. As you increase the ■ Clear Voice: Emphasizes voices over other sounds.
amount of green, the amount of red decreases and vice versa.
Equalizer
✎ When the TV is connected to a PC, you can only make changes to Backlight,
Contrast, Brightness, and Sharpness. Available in Standard sound mode only.
■ Balance L/R: Adjusts the balance between the right and left speaker.

Picture Options

■ 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the
✎
When the TV is connected to a PC, you can only make changes to the Color Tone,
loudness of specific bandwidth frequencies.
Size, and HDMI Black Level.
■ Reset: Resets the equalizer to its default settings.
■ Color Tone (Cool / Standard / Warm): Cool makes the picture bluer (cooler). Warm

Auto Volume

makes the picture redder (warmer).
✎
Warm is deactivated when the picture mode is set to Dynamic. Automatically adjusts the volume level when you change video sources or
content so the level remains the same.
■ Size: Set the size and aspect ratio of the picture on the screen.
Speaker Select
Your cable box or satellite receiver may have its own set of screen sizes as well.
However, we highly recommend you use the TVs 16:9 mode most of the time.
If you are listening to the sound track of a broadcast or movie through an
16:9: Sets the picture to the 16:9 wide screen format.
external receiver, you may hear a sound echo caused by the difference in
Zoom1: Provides moderate magnification of the picture. Sides, top, and bottom are
decoding speed between the TV's speakers and the speakers attached to your
cut off.
audio receiver. If this occurs, set the TV to External Speaker.
Zoom2: Provides larger magnification of the picture. Sides, top, and bottom are cut off.
✎ When you set Speaker Select to External Speaker, the TV's speakers
Wide Fit: Enlarges the aspect ratio of the picture so the picture fits the entire screen.
are turned off. You will hear sound through the external speakers only.
4:3: Sets the picture to the old, 4:3 format and puts black or gray borders on the right When you set Speaker Select to TV Speaker both the TV's speakers and
and left of the picture. the external speakers are on. You will hear sound through both.
✎
Do not watch your TV in the 4:3 format for a long time. The borders displayed ✎
When Speaker Select is set to External Speaker, the
on the left, right, and center of the screen in 4:3 format may cause image
buttons will not operate and the sound settings will be limited.
retention (screen burn) which is not covered by the warranty.
✎ If there is no video signal, both the TV's speakers and the external
speakers will be mute.
- 6 -
Getting Started
Accessories
• Remote Control & Batteries (AAA x 2)
• Warranty Card / Regulatory Guide
• Owner's Instructions
Input Cables (Sold Separately)
Class II product: This symbol indicates that a safety
connection to electrical earth (ground) is not required.
• Audio • Component
• Composite (AV) • Coaxial (RF)
AC voltage: Rated voltage marked with this symbol is AC
voltage.
✎
Make sure you have the correct cable before plugging it in. Illustrations of common plugs and jacks are shown below.
DC voltage: Rated voltage marked with this symbol is DC
voltage.
Cable Plugs
Caution. Consult instructions for use: This symbol
HDMI
instructs the user to consult the user manual for further
safety related information.
USB
Optical
Do not plug cables in upside down. Be sure to check the
orientation of the plug before plugging it in.
TV Controller
The TV's Controller on the bottom right side of the TV, lets you control the TV without the remote control.
Remote control sensor
✎
The product color and shape may vary depending on the model.
✎
You cannot input the numbers by pressing the TV's controller.
✎
To close the Menu, Media Play List, or Source List, press the Controller for more than 1 second.
✎ When selecting the function by moving the controller to the up/down/left/right directions, be sure not to press the controller. If you press it first,
you cannot operate it to move the up/down/left/right directions.
Plug & Play (Initial Setup)
When you turn the TV on for the first time, a sequence of screens and on-screen prompts will assist you in configuring the TV's basic settings. Press the
POWER button. Plug & Play is available only when the Input source is set to TV. Set the initial setup following instructions that the TV guides.
✎ Connecting the power cord and antenna. (refer to 'Connections')
Preferred Language
Digital channels only.
Digital-TV broadcasts can transmit many audio tracks simultaneously (for
example, simultaneous translations of a program into foreign languages).
✎
You can only select a language from among the ones being broadcast.
Multi-Track Sound (MTS)
Analog channels only.
■ Mono: Select for channels that are broadcasting in mono or if you are
having difficulty receiving a stereo signal.
Picture Size
■ Stereo: Select for channels that are broadcasting in stereo.
16:9, Zoom1, Zoom2, 4:3
■ SAP: Select to listen to the Separate Audio Program, which is usually a
16:9, Wide Fit, 4:3, Screen
foreign-language translation.
Fit
✎
Depending on the program being broadcast, you can listen to Mono,
Stereo or SAP.
SPDIF Output
The SPDIF (Sony Philips Digital InterFace) outputs an uncompressed digital
audio signal when you connect the digital audio jack on the back of the TV to
a digital audio in jack on a receiver or home theater.
■ Audio Format: You can select the Digital Audio output (SPDIF) format. The
available Digital Audio output (SPDIF) format may differ depending on the
input source.
■ Audio Delay: Lets you correct timing mismatches between the audio track
and the video when you are watching the TV and listening to digital audio
output from the TV through an external device such as an AV receiver.
When you select Audio Delay, a slider appears. Use the left and right arrow
buttons to adjust the slider. Press ENTERE when done (0ms ~ 250ms).
Visually Impaired
(digital channels only)
Adds a verbal description to the main audio to help the visually impaired.
Dolby Digital Comp
Sets Dolby Digital compression mode.
HDMI Audio Format
You can select the HDMI Audio format. The available HDMI Audio format may
differ depending on the input source.
Sound Reset
■ Reset All: Resets all sound settings to the factory defaults.

Channel Menu

❑ Memorizing Channels

When you first set up your TV using Plug & Play, the TV memorized the
channels that were available over the air or through your cable system and
added them to the Channel List. The Antenna and Auto Program functions
described below let you re-run the channel memorization function without
having to re-run the Plug & Play procedure.
Antenna (Air / Cable)
Before your television can memorize the available channels, you must
select your TV's signal source, Air (using an antenna) or Cable. Select Menu >
Channel > Antenna > Air or Cable. After you have selected the signal source,
go on to the Auto Program function.
✎ Selecting the signal source using the Antenna function also
determines the signal source the TV is tuned to. For example, if you
receive your TV signal over the air, and you select Cable, you will see
only snow. You must select Air to see a picture.
VOLUME and MUTE
Connections
• For the best picture and audio quality, connect digital devices using an
HDMI cable.
• Power Cord • If you connect an external device to the TV that uses an older version
• Cable Guide of HDMI, the video and audio may not work. If this occurs, ask the
manufacturer of the device about the HDMI version and, if it is out of date,
request an upgrade.
• Be sure to purchase a certified HDMI cable. Otherwise, the picture may not
display or a connection error may occur.
• PC/DVI AUDIO IN input is not supported.
• HDMI
• HDMI-DVI
Ports/Jacks Do not plug in opposite or wrong direction. It could damage
DVI OUT
the TV port.
Selecting the Media Play
Function menu
m R Selecting a Source
P
Power Off
HDMI OUT
Return
Blu-ray player / DVD / Set-top box
TV Controller
AV Device (1)
Selecting the Menu
The image is drawn by facing
Using an HDMI Cable
the front side of the TV. (up to 1080p)

Input Menu

Source List

Use to select TV or other external input sources such as DVD / Blu-ray
players / cable box / STB satellite receiver connected to the TV.
1. Press the SOURCE
2. Select a desired external input source.
■ TV / AV / Component / HDMI1 / HDMI2/DVI
You can only choose external devices that are connected to the TV. In the
Source List, connected inputs are highlighted.
- 3 -
Auto Program
❑ The Channel List Tools Menu t
The Auto Program function memorizes all channels that are available over the air
The Channel List Tools menu contains most of the functions you can use on the
or through your cable system and adds them to the Channel List. If you are using a All Channels, Added Channels, and Favorite Channels List screens. To view,
cable or satellite box, you do not need to run the Auto Program function. select a list screen, select a channel, and then press the
To start Auto Program, follow these steps:
■ Add / Delete: Delete a channel from or add a channel to the Added Channels list.
1. Push MENUm → Channel → Auto Program → ENTERE on your remote. The To delete channels from the Added Channels list, follow these steps:
1. Select one or more channels in the Added Channels list using the ▲/▼
Antenna Source screen appears.
buttons and the Yellow Select button on your remote.
2. On the Antenna Source screen, select the source of your TV signal.
2. Press the TOOLS
3. Select Delete in the Tools menu, and then press the ENTERE button.
Air
To add channels to the Added Channels list, follow these steps:
If your TV is connected to an antenna choose Air, and then press ENTERE. The
1. Select one or more channels in the All Channels list using the ▲/▼
TV will automatically start memorizing channels.
buttons and the Yellow Select button on your remote.
2. Press the TOOLS
Cable
3. Select Add in the Tools menu, and then press the ENTERE button.
If your TV is connected to a cable outlet, choose Cable , and then press ✎ All deleted channels will be shown on the All Channels list. You add
Go to Step 3. channels back to the Added Channels list on the All Channels list.
ENTERE.
✎ A gray-colored channel indicates the channel has been deleted from
Auto
the Added Channels list.
If you choose , and then press , the TV will automatically
Auto ENTERE ✎ The Add menu option only appears for deleted channels.
■ Add to Favorite/Delete from Favorite: Lets you add channels to and delete
select the correct Antenna source. Go to Step 3.
channels from your Favorite Channels list.
3. On the Cable Type screen, use the ◀/▶/▲/▼ buttons to select the type of
To add channels to the Favorite Channels list, follow these steps:
digital and analog cable systems you have: STD, HRC, or IRC. Most systems are
1. Select one or more channels in the All Channels list using the ▲/▼
STD (Standard). When done, select Start, and then press ENTERE. The TV will
buttons and the Yellow Select button on your remote.
start memorizing channels.
2. Press the TOOLS
3. Select Add to Favorite in the Tools menu, and then press the ENTERE
✎ Channel memorization can take up to 45 minutes, depending on your
button.
cable system.
To delete channels from the Favorite Channels list, follow these steps:
✎
Memorized channels are added to the Added Channels list. These are the
1. Select one or more channels in the Favorite Channels list using the ▲/▼
channels you will see when you use the Channel buttons on your remote. buttons and the Yellow Select button on your remote.
2. Press the TOOLS
Clear Scrambled Channel
3. Select Delete from Favorite in the Tools menu, and then press the
ENTERE button.
This function filters out scrambled channels after Auto Program is
■ Timer Viewing: You can schedule a channel to be displayed automatically at
completed. This process may take up to 20~30 minutes.
a set time, even when you are watching another channel. You must set the
✎
Press the ENTERE button to stop the Clear Scrambled Channel.
current time first in the Time > Clock function to use Timer Viewing.
✎ To schedule a channel, follow these steps:
This function is only available in Cable mode.
1. Select a channel in the Added Channels list using the ▲/▼ buttons and

❑ Managing Channels

the Yellow Select button on your remote.
2. Press the TOOLS
Channel List
3. Select Timer Viewing in the Tools menu, and then press the ENTERE
button. The Timer Viewing screen appears.
See your list of Added channels, Favorite channels, or channels you've
4. Use the ◀/▶ buttons to move from entry field to entry field and the ▲/▼
scheduled for viewing. Add or delete Favorite channels, add or delete
buttons to change the entries. Where numbers are displayed, you can
channels from the Added Channels list, schedule channels or programs for also enter numbers directly using the number keypad on your remote.
✎
viewing. Watch a channel by selecting the channel in the All Channels, Added If you select Everyday or Every Week, the date you select in the
Channels, or Favorite Channels screen, pressing the ▲ / ▼ buttons, and then Date field becomes the start date for your scheduled viewing.
pressing the ENTERE button. For Everyday, the TV will turn on every day, at the time you
selected, starting from that date. For Every Week, the TV will
Channel List Screens icons are listed on the left side. Select an icon using the
turn on every week, on the same day of the week as the start
▲ / ▼ buttons to view each list.
date you selected, at the time you selected, from that day on. If
■ All Channels: Shows all currently available channels including those
you select Once, the TV will turn on once, on the date and time
you deleted from the Added Channels list.
you selected.
Added Channels 5. Press the ENTERE button on your remote when done.
Added Channels: Shows all . These are the channels
■
✎
that appear when you press the CH button. Only Added Channels can be scheduled.
■ * Favorite Channels: Shows all favorite channels. ✎ Scheduled programs and channels are displayed in the Programmed
Programmed: Shows all channels and programs currently scheduled List.
■
using Timer Viewing.
✎ When you select a digital channel, press the ▶ button to view the
✎
Remote control buttons active on the Channel List screen. digital program list. If you highlight a program in the list, and then
x press the ENTERE(Schedule) button, you set Timer Viewing for
Green (Zoom): Enlarges or shrinks a channel number.
x that program directly.
Yellow (Select): Move the cursor to a channel. Press the Yellow
button to select the channel. A c mark appears. Repeat to ■ Channel Name Edit: Analog channels only. Lets you assign a name of up to
select additional channels. Then, open the Tools menu and five characters to an analog channel. For example, Hist, Food, Golf, etc. This
apply a function to the channels you selected.
makes it easier to find and select a channel .
x T (Tools): Displays the Channel List Tools menu. (The Tools
■ Select All: Select all the channels in the displayed channel list.
menus may differ depending on the situation.)
■ Deselect All: Deselect all the selected displayed channels.
✎
If you use a cable box or satellite box, you cannot use the Channel List
or the Channel List functions. ✎ You can only select Deselect All when one or more channels are
selected.
Display Icons Used in the Channel List Screens
■ Auto Program: See Auto Program under Memorizing Channels.
Programmed List (on the Channel List Screen)
Icons Meaning
c A selected channel.
The Programmed list displays the channels and programs you have scheduled
* A Favorite channel. for viewing using the Timer Viewing function. You can view, modify, or delete a
show you have scheduled using the functions on the Programmed List screen
) A reserved program.
Tools menu.
A program currently being broadcast.
(
- 7 -
• For an HDMI to DVI cable connection, you must use the HDMI IN 2 (DVI)
port.
• Connecting through the HDMI cable may not be supported depending
on the PC.
• If an HDMI to DVI cable is connected to the HDMI IN 2 (DVI) port, the
audio does not work.
• For Set-top box connection using HDMI cable, we highly recommend you
to connect the HDMI IN 1 (STB) port.
Digital Audio System
PC Audio Device
OPTICAL
PC
Using an HDMI Cable or an
Using an Optical (Digital)
HDMI to DVI Cable. Use the Cable
PC speakers for audio.
TV Side Panel
TV Rear Panel
Power Input
Media Play
R W R B R G R W R Y
Using a USB Drive
or
R W R B G R W Y
VHF/UHF Antenna
ANT OUT
AUDIO OUT COMPONENT OUT AUDIO OUT VIDEO OUT
R-AUDIO-L P R P B Y R-AUDIO-L
Cable
Blu-ray player
VCR
AV Device (3)
AV Device (2)
Using a Component
Using Audio/Video
Cable (up to 1080p)
Cables
How to use Edit Name
Edit Name lets you associate a device name to an input source, making it
easier to select a source. To access Edit Name, enter the Input menu, and
then select Edit Name. Select the name of the device from the drop down
next to the name of the input jack it is connected to. For example, if your
Blu-ray player is connected to HDMI 2, select Blu-ray player from the drop
down next to HDMI 2.
button.
✎ If you have connected a PC to the HDMI IN 2 (DVI) port with an HDMI
cable, you should select PC mode in Edit Name.
✎
If you have connected a PC to the HDMI IN 2 (DVI) port with an HDMI
to DVI cable, you should select DVI PC mode in Edit Name.
✎ If you have connected an AV device to the HDMI IN 2 (DVI) port with
an HDMI to DVI cable, you should select DVI mode in Edit Name.
- 4 -
t
Programmed List Screen Tools Menu
■ Change Info: Change the scheduling information for a show or channel you
have scheduled.
TOOLS button.
To change the information, follow these steps:
1. Select the Programmed List icon on the left side of the Channel List
screen, and then press the ENTERE button.
2. On the Programmed List screen, select the show or channel entry you
want to change, and then press the TOOLS button. The Tools Menu
appears.
button on your remote. The Tools menu appears.
3. Select Change Info, and then press the ENTERE button. The Timer
Viewing screen appears.
4. Use the ◀/▶ buttons to move from entry field to entry field and the ▲/▼
buttons to change the entries. Where numbers are displayed, you can
also enter numbers directly using the number keypad on your remote.
button on your remote. The Tools menu appears. 5. Press the ENTERE button when done.
■ Cancel Schedules: Cancel a show or channel you have scheduled.
To cancel a scheduled show or channel, follow these steps:
1. Select the Programmed List icon on the left side of the Channel List screen,
and then press the ENTERE button.
2. On the Programmed List screen, select the show or channel entry you want to
cancel, and then press the TOOLS button. The Tools Menu appears.
3. Select Cancel Schedules, and then press the ENTERE button. The Cancel
Schedules screen appears.
4. Select OK, and then press the ENTERE button.
■ Information: Display the information for a show or channel you have scheduled.
You can also change the schedule Information.
1. Select the Programmed List icon on the left side of the Channel List screen,
button on your remote. The Tools menu appears.
and then press the ENTERE button.
2. On the Programmed List screen, select the show or channel entry you want
information for, and then press the TOOLS button. The Tools Menu appears.
3. Select Information, and then press the ENTERE button. The Timer Viewing
Info screen appears.
4. Select Change Info, and then press the ENTERE button to change
button on your remote. The Tools menu appears. information, or select Close, and then press the ENTERE button to close the
Information screen.
■ Select All / Deselect All: You can select or deselect all channels in the channel list.
❑ Other Channel Menu Functions
Channel Mode (Added Channels/Favorite Channels)
Lets you select the channel list displayed when you press the <CH>
(Channel) button on your remote. For example, if you select Favorite Channels,
button on your remote. The Tools menu appears. you will only see Favorite channels when you press the <CH> button.
Fine Tune
Analog channels only.
If the reception is clear, you do not have to fine tune the channel, as this is
done automatically during the search and store operation. If the signal is weak
or distorted, fine tune the channel manually.
✎
Select the channel, and then select Fine Tune.
✎
Fine tuned channels that have been saved are marked with an asterisk
"*" on the right-hand side of the channel number in the channel banner.
✎
To reset fine-tuning, select the channel, select Fine Tune, and then
select Reset on the Fine Tune screen.
Setup Menu
Plug & Play
Lets you re-run the Plug & Play initial setup procedure. For instructions, see
your Quick Start Guide.
Language
Set the menu language.
✎ Choose between English, Español, and Français.

❑ Setting the Time

Time
✎
The time you set will appear when you press the INFO button.
■ Clock: Set the clock so you can use the various timer features of the TV.
✎
If you disconnect the power cord, you have to set the clock again.
To set the clock, follow these steps:
1. Select Setup >Time > Clock.
2. Press ENTERE and select Auto or Manual, and then press ENTERE again.
If you selected Auto:
The TV will automatically download the correct time from a digital channel.
• Select Time Zone, and then press the ENTERE button. Use the▲/▼
buttons to select your Time Zone, and then press ENTERE.
• Select DST (Daylight Savings Time), and then press ENTERE. Select On
if you want to turn the DST adjustment on and off manually. Select Off to
turn off the DST adjustment. Press ENTERE when done.
✎ The DST and Time Zone functions are only available when the Clock
Mode is set to Auto.
- 8 -