Inserter; Part Names; Specifications - Sharp MX-M700U Operation Manual

INSERTER

The inserter enables blank sheets or printed sheets to be added to copy and print output as covers or inserts
without printing. The inserter also allows feeding of heavy paper that cannot be fed from the other trays.
Printed output can also be fed one set at a time from the inserter for stapling or punching without performing
stapling or staple sorting finishing (see "Manual operation of the inserter" (page 3-15)).
When feeding from the inserter for pamphlet copying (page 5-6), cover or insert copying (page 5-12), or
transparency insert copying (page 5-23), select "INSERTER" in step 4 of "Setting the paper type and paper size"
(page 2-14), and be sure to perform steps 5 through 8. In step 9, make sure that the checkboxes below "PRINT",
"COPY", and "DOC. FILING" are selected. If any of these checkboxes are not selected, touch them so that a
checkmark appears.
When feeding from the inserter for pamphlet copying (page 5-6), cover or insert copying (page 5-12), or
transparency insert copying (page 5-23), select the inserter in the tray settings. The inserter attributes can also
be selected in the system settings (see page 2-18).

Part names

NOTE
To install the inserter...
An optional finisher or saddle stitch finisher must be installed (page 3-2).

Specifications

Name
Paper weight
Paper types
Paper size
Paper capacity
Paper conveying
Power supply
Dimensions
Weight
Specifications are subject to change for improvement without notice.
3-14
Inserter (AR-CF2)
60 to 256 g/m
(16 lbs. to 68* lbs.) *For index paper, equivalent to 140-lbs.
2
Plain paper, special paper (transparency film, coloured paper, paper with punch holes,
tabbed paper, etc.)
(Consult your retailer for more information on special papers that can be used.)
A 3 , B 4 , A 4 , A 4 R , B 5 , B 5 R , A 5 R , 1 1 " x 1 7 " , 8 - 1 / 2 " x 1 4 " , 8 - 1 / 2 " x 1 3 " ,
8 - 1 / 2 " x 1 1 " , 8 - 1 / 2 " x 1 1 " R , 7 - 1 / 4 " x 1 0 - 1 / 2 " R , 5 - 1 / 2 " x 8 - 1 / 2 " R
Max. 100 (80 g/m
(20 lbs.))
2
Centre reference
Supplied from machine
When paper tray is folded up: 285 (565*) mm (W) x 585 mm (D) x 1120 mm (H)
Not including stopper (40 mm (1-37/64")) when attached to machine
* Including paper tray
Approx. 24 kg (Approx. 53 lbs.)
Paper tray
1
Place blank or printed paper here to be inserted.
Paper guide
2
When loading paper, adjust this guide to the width of the paper.
Top cover
3
Open for misfeed removal.
Inserter operation panel
4
Stapling and punching can be performed directly
from the inserter operation panel without using the
machine operation panel.
Paper guide lever
5
Release the paper guide lock to remove misfed paper.
Front cover
6
Open this cover to remove misfed paper from the
finisher or saddle stitch finisher.
(11-15/64" (22-1/4"*) (W) x 23-3/64" (D) x 44-7/64" (H))