Misfeed Removal - Sharp MX-M700U Operation Manual

Misfeed removal

When a misfeed occurs in the inserter, remove the misfed paper following the procedure below.
■ Misfeed in the inserter
Gently move the inserter away from the
1
machine while pressing the button.
2 Remove the misfed paper from the main
unit.
3 If misfed paper is not found in step 2, open
the top cover.
4 Remove the misfed paper.
If a misfeed was not found in step 4, raise
5
the paper guide lever.
Be careful not to tear the
misfed paper during
removal.
After removing the
misfed paper, perform
steps 1 and 3 on page 2-
24 to reset the machine.
Be careful not to tear the
misfed paper during
removal.
6 Remove the misfed paper.
7 If a misfeed was not found in step 6,
remove the misfed paper from under the
paper guide.
8 Return the paper guide lever to its original
position.
9 Push the finisher to close the gap between
the machine and the inserter.
INSERTER
Be careful not to tear the
misfed paper during
removal.
Be careful not to tear the
misfed paper during
removal.
After attaching the
inserter on the machine,
make sure that the paper
misfeed message has
been cleared and the
normal message display
appears.
3-17
3