Margin Shift - Sharp MX-M700U Operation Manual

Margin shift

The margin shift function will automatically shift the text or image on the copy paper approximately 10 mm (1/2") in
its initial setting.
This function is convenient when stapling or binding copies with a string.
NOTE
The initial setting for the margin width can be changed in the administrator settings to any value from 0 to 20 mm
(0" to 1") (page 16 of the administrator settings guide).
One-sided copying
Image shifted
Original
to the right
Margin
Two-sided copying
Original
Image shifted
to the right
Or
Margin
To display the special modes screen...
See "General procedure for using special
functions" on page 5-2.
1 Touch the [MARGIN SHIFT] key on the
special modes screen.
SPECIAL MODES

MARGIN SHIFT

ERASE
JOB
PAMPHLET COPY
BUILD
Select the shift direction.
2
RIGHT
LEFT
Image shifted
to the left
Margin
Image shifted
to the left
Margin
The margin shift setting
screen will appear.
The margin shift icon
( ) will also appear in
the upper left of the
screen to indicate that
the function is turned on.
Touch a shift direction
key to select right or left.
The selected key will be
highlighted.
●The shift direction can be selected from right or left
shift as shown in the illustration.
Set the shift amount as needed and touch
3
the [OK] key.
OK
CANCEL OK
SIDE 1 SIDE 2
(0 20) (0 1)
10 10
mm mm
Touch the [OK] key on the special modes
4
screen.
You will return to the main screen of copy mode.
About the steps that follow
If an automatic document feeder is being used,
see pages 4-7 through 4-10. If the document
glass is being used, see pages 4-11 through 4-
13.
To cancel the margin shift function, touch the
[CANCEL] key on the margin shift setting screen
(step 3).
SPECIAL MODES
Use the and the
keys to set the shift
amount. The shift
amount can be set from
0 to 20 mm in 1 mm (0"
to 1" in 1/8") increments.
5-3
5