Inserter; Part Names - Sharp MX-M753 Operation Manual

INSERTER

The inserter enables blank sheets or printed sheets to be added to copy and print output as covers or inserts without
printing. The inserter also allows feeding of heavy paper that cannot be fed from the other trays.
Printed output can also be fed one set at a time from the inserter for stapling or punching without performing stapling or
staple sorting finishing (see
When feeding from the inserter for pamphlet copying (page 2-49), cover or insert copying (page 2-60), or transparency
insert copying (page 2-71), see
procedures.

PART NAMES

(1) Paper tray
Place blank or printed paper here to be inserted.
(2) Paper guide
When loading paper, adjust this guide to the width of the
paper.
(3) Top cover
Open for misfeed removal.
To install the inserter...
An optional finisher or saddle stitch finisher must be installed (page 1-50).
"MANUAL OPERATION OF THE
"Paper Tray Settings" (page 7-13) in the System Settings for setting configuration
(1) (2) (3)
(6)
BEFORE USING THE MACHINE
INSERTER" (page 1-63)).
(4) (4)
(5)
(4) Inserter operation panel
Stapling and punching can be performed directly from the
inserter operation panel without using the machine
operation panel.
(5) Paper guide lever
Release the paper guide lock to remove misfed paper.
(6) Front cover
Open this cover to remove misfed paper from the finisher
or saddle stitch finisher.
1-61
Contents