Finisher And Saddle Stitch Finisher; Part Names; Specifications - Sharp MX-M700U Operation Manual

FINISHER AND SADDLE STITCH FINISHER

The finisher and the saddle stitch finisher include the offset function, which offsets each set of copies from the
preceding set for easy separation. Each set of sorted copies can also be stapled. The saddle stitch finisher can
automatically staple a set of copies at the centre line and fold the pages to create a pamphlet.
A punch module unit can be installed to add punch holes to copies, and an inserter can be installed to insert blank
pages at specified pages.
In the following explanations, the finisher and saddle stitch finisher are referred to simply as "finisher".

Part names

Finisher Saddle stitch
(AR-F15) finisher (AR-F16)
Finisher (AR-F15)
* The illustrations on the following pages (to page 3-18) show the AR-F16; however, the operation of the AR-F15
is the same as the AR-F16.
NOTES
● Do not press on the finisher.
● Use caution when near the offset tray during printing as the tray moves up and down.

Specifications

Name
Number of trays
Paper output
Paper capacity
3-2
Finisher (AR-F15)
2
Upper paper tray/Middle paper tray:
Non-stapling:
2000 sheets of paper or total aggregate
thickness is within 250mm (9-53/64"):
A4, B5, A5R, 8-1/2" x 11" or 5-1/2" x 8-1/2"R
(80 g/m
(20 lbs.))
2
1000 sheets of paper or total aggregate
thickness is within 140mm (5-1/2"):
Sizes other than the above
Stapling:
100 sets or 750 pages of A4, B5 or 8-1/2"
x 11" paper.
100 sets or 500 pages of other sizes of
paper
Saddle stitch finisher
(AR-F16)
Saddle stitch finisher (AR-F16)
3
Face down output
Upper paper tray/Middle paper tray:
Non-stapling:
2000 sheets of paper or total aggregate thickness
is within 250mm (9-53/64"): A4, B5, A5R, 8-1/2" x
11" or 5-1/2" x 8-1/2"R, (80 g/m
1000 sheets of paper or total aggregate thickness is
within 140mm (5-1/2"): Sizes other than the above
Stapling:
100 sets or 750 pages or total aggregate thickness is
within 110mm (4-5/16") of A4, B5 or 8-1/2" x 11" paper.
100 sets or 500 pages or total aggregate thickness
is within 74mm (2-29/32") of other sizes of paper
Lower tray:
Stapled print capacity is (11 - 15) sheets x 10 sets, (6
- 10) sheets x 20 sets, (1 - 5) sheets x 25 sets.
Tray
1
Offset pages and stapled
pages are delivered here.
Stapler compiler
2
Paper to be stapled is stacked
temporarily.
Top cover
3
Open for misfeed removal.
Punch module (Option)
4
Adds punch holes to printed pages.
Front cover
5
Open to replace the staple
case in the staple unit or clear
jammed staples.
Lower cover
6
Open to clear misfed paper
replace the staple cartridge in the
pamphlet unit. (AR-F16 only)
Saddle stitch tray
7
Saddle stitched output is
delivered here.
(AR-F16 only)
(20 lbs.))
2
(Continued on next page)
or