Transparency Film With Insert Sheets - Sharp MX-M700U Operation Manual

Transparency film with insert sheets

When copying onto transparency film, blank insert sheets can be placed between transparent sheets.
Example: Inserting insert sheets between transparencies
Originals (1-sided)
Originals (2-sided)
Two-sided originals are
only supported when
automatic document
feeding is used.
If the transparencies are loaded in tray 3, steps
1 to 5 below are not necessary.
Load transparency film into the bypass
1
tray.
2 Touch the [PAPER SELECT] key in the
main screen and select the bypass tray
paper type in the paper setting screen
(touch (X) below).
FOR COPY.
AUTO
ORIGINAL
2. B5
A4
AUTO
PLAIN PLAIN
EXPOSURE
5. A4
HEAVY PAPER
PAPER SELECT
PLAIN PLAIN
100%
COPY RATIO
(X)
3 Touch the [TRANSPARENCY] key.
TYPE.
LETTER HEAD HEAVY PAPER
PRE-PUNCHED LABELS
COLOUR TRANSPARENCY
Insert sheets
Inserts can also be
copied on.
Remove any paper
already in the bypass
tray before loading the
transparency film. (To
load paper in the bypass
tray, see pages 2-10 and
2-11.)
0
● This function only operates in "one-sided to one-
sided" and "two-sided to one-sided" modes.
● Multiple copies cannot be selected in this mode.
● The inserts are inserted under each transparency
as shown at left.
● Select insert paper that is the same size as the
transparencies.
● When feeding insert paper from an inserter,
copying on the insert paper is not possible.
● Transparencies can be fed from the bypass tray
or tray 3.
● If the transparencies are loaded in tray 3, be sure
to set the paper size and paper type as explained
on pages 2-14 and 2-15.
4 Touch the [OK] key.
TYPE/SIZE SETTING
SIZE
AUTO-INCH
8 X11 1 / 2
AUTO-AB A4,B5
SIZE INPUT
If the paper size was changed from an inch size to
an AB size, or from an AB size to an inch size, be
sure to set the paper type and size as explained on
steps 5 to 7 on page 2-14 and steps 8 to 10 on
page 2-15.
5 Select the bypass tray.
AUTO
ORIGINAL
A4
AUTO
N PLAIN
EXPOSURE
Y 5. A4
PAPER SELECT
N PLAIN
100%
COPY RATIO
To display the special modes screen...
See "General procedure for using special
functions" on page 5-2.
Touch the [TRANSPARENCY INSERTS]
6
key in the special modes screen (2nd
screen).
SPECIAL MODES
TRANSPARENCY
COVERS/INSERTS
INSERTS
BOOK COPY TAB COPY
SPECIAL MODES
TYPE OK
NON STANDARD SIZE
2/2
0
The Transparency inserts
setting screen will appear.
The transparency inserts
icon ( , etc.) will also
appear in the upper left
corner of the screen to
indicate that the function
is turned on.
5-23
5