Sharp MX-M700U Operation Manual page 115

Select whether or not you wish to copy on
5
the cover ("YES" or "NO").
PRINT ON COVER
YES NO
6 Select the paper tray for the cover.
CANCEL OK
PAPER TRAY
BYPASS
TRAY
A4
PLAIN
In the example screen above, A4 (8-1/2" x 11")
size plain paper is loaded.
To change the paper tray for the cover, touch the
tray selection key. (In the screen example, the
"BYPASS TRAY" display is the tray selection key.)
The tray selection screen appears when the tray
selection key is touched. Select the desired tray in
this screen.
NOTES
● When the cover paper is fed from the inserter, the
cover cannot be copied on.
● Two-sided copying is not possible on label sheets,
transparency film, and tabbed paper. When
copying on a cover, do not select a tray that has
one of these types of paper.
Touch the [OK] key.
7
CANCEL OK
RIGHT
G
BINDING
COVER
SETTING
8 Touch the [OK] key.
OK
CANCEL OK
RIGHT
LEFT
BINDING
BINDING
COVER
SETTING
The currently selected
1
paper tray for the
cover is displayed.
The size and type of
2
paper in the currently
selected tray is
displayed.
Return to the main
screen of copy mode.
Place the original in the document feeder
9
or on the document glass. (page 4-3)
Ensure that the desired paper size has
10
been automatically selected based on the
original size.
AUTO A3
PAPER SELECT
100%
the original size and the paper size. (See steps 2
and 3 on page 4-15.)
Select any desired copy settings such as
11
the exposure or number of copies, and
then press the [START] key.
12 [When using the automatic document
feeder:]
Copying will start after all originals have been
scanned. (The next step is not needed.)
[When using the document glass:]
Replace the original with the next original and
press the [START] key. Repeat this operation until
all originals have been scanned and then touch
the [READ-END] key.
NOTES
● When the pamphlet copy function is set, the two-
sided copying mode will be automatically selected.
● If this function is used in combination with the
pamphlet copy function (pamphlet stapling) and
the number of origial pages exceeds the number
of pages that can be stapled, a message asking
you to select "CANCEL", "CONTINUE", or
"DIVIDE" will appear.
To cancel the job, select "CANCEL". To make
pamphlet copies without
"CONTINUE". To divide the pages into sets that
can be stapled, select "DIVIDE".
If you performed steps 4 to 6 to insert cover paper,
divided stapling is not possible. You can either
continue pamphlet copying without stapling, or
cancel the job.
To cancel the pamphlet copy function, touch the
[CANCEL] key on the pamphlet copy setting screen
(step 2).
SPECIAL MODES
To select another size
paper, select the desired
size and touch the
[AUTO IMAGE] key. The
appropriate copy ratio
will be selected
automatically based on
stapling, select
5-7
5