Misfeed In The Transport Area, Fusing Area, And Exit Area - Sharp MX-M700U Operation Manual

MISFEED REMOVAL

Misfeed in the transport area, fusing area, and exit area

CAUTION
The fusing unit is hot. Take care in removing paper.
(Do not touch the metal parts.)
Remove the duplex unit.
1
2 Remove the misfed paper as shown in the
illustrations below.
Misfed in the transport area
Roller rotating knob A
NOTES
Transfer roller
Photoconductive drum
open may adversely affect the photo-sensitive drum
and cause poor copy quality.
2-24
Grasp the finger hold
and gently open the unit.
Turn roller rotating knob
A in the direction of the
arrow to remove the
misfed paper.
Do not touch or
damage the transfer
roller.
Do not touch or
damage the
photoconductive
drum.
After clearing the
misfeed, promptly
close the duplex unit.
Leaving the unit
Misfed in the fusing area
Roller rotating knob B
CAUTION
The fusing unit is hot. Take care in removing paper.
(Do not touch any metal parts.)
Fusing unit open tab
Misfed in the exit area
3 Gently close the duplex unit.
o
Turn roller rotating knob
B in the direction of the
arrow to remove the
misfed paper.
If the misfed paper is
inside the fusing area,
turn down the fusing unit
open tab to open the
fusing unit and remove
the misfed paper.
Be careful not to tear the
misfed paper during
removal.
After closing, confirm
that the misfeed
message has been
cleared and the normal
display appears.