Programming A User Name - Sharp MX-M700U Operation Manual

■ Programming a user name

To program a user name, follow steps 1 and 2 on page 7-24, touch the [USER NAME REGISTRATION] key in
step 3, and then follow these steps:
1 Touch the [USER NAME] key.
SYSTEM SETTINGS
No.001
USER NAME
PASSWORD
SELECT THE DEFAULT FOLDER THE F
STORED TO:
name (maximum of 16 characters). See page 7-29
for the procedure for entering characters.
2 Touch the [INITIAL] key.
NEXT
INITIAL
R THE FILE WITH THIS USER NAME IS STORED.
3 Touch the [PASSWORD] key.
SYSTEM SETTINGS
No.001
Yamada
USER NAME
PASSWORD
SELECT THE DEFAULT FOLDER THE FIL
STORED TO:
4 Set a password for the user name (enter a
5-digit password with the numeric keys).
CANCEL
ENTER PASSWORD VIA THE 10-KEY PAD.
then enter the correct number.
Touch the [OK] key.
5
EXIT
OK
CANCEL
10-KEY PAD.
The lowest number that
has not yet been
programmed appears
automatically in "No.".
Touch the number to
display a character entry
screen and enter a user
A character entry screen
appears. Enter up to 10
search characters. See
page 7-29 for the
procedure for entering
characters.
A password cannot be
omitted.
This will be the password
for the user name
entered in step 1.
As each digit is entered,
"-" changes to " ". If
you make a mistake,
press the [C] key and
6 If you wish to specify a folder for the user
name, touch the [STORED TO:] key. If you
wish to use the main folder, go to step 8.
No.001 REGISTRATION IS COMPLETED.
USER NAME Yamada
PASSWORD
SELECT THE DEFAULT FOLDER THE FILE
STORED TO: MAIN FOLDER
7 The folders that have been created appear.
Touch the desired folder. If you wish to
create a new folder, or if no folders have
been created, touch the [ADD NEW] key.
STORED TO:
CUSTOM FOLDER 1
CUSTOM FOLDER 3
CUSTOM FOLDER 5
CUSTOM FOLDER 7
ALL FOLDERS ABCD EFGHI JKLMN
If you touched the [ADD NEW] key, program a
name for the folder as explained on page 7-27.
The user name programmed in step 1 is selected
as the user name of the folder.
8 Touch the [EXIT] key.
EXIT
– – – – –
9 To exit, touch the [EXIT] key. To program
another user name, touch the [NEXT] key.
NEXT EXIT
INITIAL Yamada
WITH THIS USER NAME IS STORED.
SYSTEM SETTINGS
MAIN FOLDER ADD NEW
CUSTOM FOLDER 2
1/1
CUSTOM FOLDER 4
CUSTOM FOLDER 6
CUSTOM FOLDER 8
OPQRS UVWXY
You will return to the
"USER NAME
REGISTRATION"
screen.
"REGISTRATION IS
COMPLETED." will
appear highlighted next
to "No.".
If you touched the [EXIT]
key, you will return to the
screen of step 3 on page
7-24. If you touched the
[NEXT] key, a new user
entry screen will appear.
Repeat steps 1 to 9 to
program a new user.
7-25
7