Sharp MX-M700U Operation Manual page 67

Paper size
Paper weight
Paper full detection
Paper sizes for which
offset is possible
Allowed paper sizes for
stapling
Maximum number of
sheets for stapling
Stapling positions
Paper conveying
Power supply
Dimensions
Weight
Overall dimensions when
attached to machine
*For index paper, equivalent to 140-lbs.
Name
Model*
1
Number of holes
Paper sizes for hole
punching
Paper weight
Power supply
Dimensions
Weight
*1 Multiple punch modules cannot be installed together. Some models may not be available in some regions.
*2 With AR-PN4B, two or three holes can be punched depending on the paper size.
*3 With AR-PN4C and AR-PN4D, the number of holes is the same. The hole interval, however, is not the same.
Specifications are subject to change for improvement without notice.
NOTES
● The following papers cannot be stapled and punched:
Special papers such as transparency film and label sheets
● If mixed paper sizes are selected for stapling jobs, stapling will be automatically cancelled.
■ Supplies
The finisher and saddle stitch finisher require the following staple cartridge:
● Staple cartridge for finisher
(approx. 5,000 per cartridge
X 3 cartridges)
SF-SC11
Upper paper tray/Middle paper tray:
A3, B4, A4, A4R, B5, B5R, A5R, 11" x 17",
8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 8-
1/2" x 11"R, 7-1/4" x 10-1/2"R, 5-1/2" x 8-
1/2"R
Upper paper tray/Middle paper tray:
60 to 256 g/m
(16 to 68* lbs.)
2
Both upper and lower tray
A3, B4, A4, A4R, B5, 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R
Upper paper tray/Middle paper tray:
A3, B4, A4, A4R, B5, 11" x 17", 8-1/2" x
14", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x
11"R
See "Staple sort mode" on 3-4 page
1 place at back, 1 place at back (diagonal), one place at front (diagonal), 2 places
When tray is folded up: 648 mm (W) x 630 mm (D) x1150 mm(H)
(25-33/64" (W) x 24-13/16" (D) x 45-9/32" (H))
When tray is extended: 773 mm (W) x 630 mm (D) x1150 mm(H)
(30-7/16" (W) x 24-13/16" (D) x 45-9/32" (H))
Not including stopper (40 mm (1-37/64")) when attached to machine
Approx. 51 kg (Approx. 113 lbs.)
773 mm (W) x 630 mm (D) (Separation from machine 400 mm)
(30-7/16" (W) x 24-13/16" (D) (Separation from machine 15-3/4"))
Punch module
AR-PN4A
2
A3, B4, A4, A4R, B5, 3 holes: A3, A4,
B5R, 11" x 17",
11"x17", 8-1/2"x14", 8-1/2" x 11"
8-1/2"x13", 2 holes: 8-1/2"x14",
8-1/2"x11", 8-1/2"x13",
8-1/2"x11"R 8-1/2" x 11"R
Supplied from finisher / saddle stitch finisher
95 mm (W) x 560 mm (D) x 170 mm (H) (3-3/4" (W) x 22-1/16" (D) x 6-45/64" (H))
FINISHER AND SADDLE STITCH FINISHER
Upper paper tray/Middle paper tray:
A3, B4, A4, A4R, B5, B5R, A5R, 11" x 17",
8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 8-1/2"
x 11"R, 7-1/4" x 10-1/2"R, 5-1/2" x 8-1/2"R
Lower tray:
A3, B4, A4R, 11" x 17", 8-1/2" x 11"R
Upper paper tray/Middle paper tray/Lower tray:
60 to 256 g/m
Upper, middle and lower tray
Upper paper tray/Middle paper tray:
A3, B4, A4, A4R, B5, 11" x 17", 8-1/2" x 14",
8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R
Lower tray:
A3, B4, A4R, 11" x 17", 8-1/2" x 11"R
Centre reference
Supplied from machine
Approx. 71 kg (Approx. 157 lbs.)
AR-PN4B* AR-PN4C*
2
3 or 2
A3, A4
60 to 256 g/m
(16 to 68 lbs.)
2
Approx. 3.5 kg (Approx. 7.8 lbs.)
● Staple cartridge for saddle
stitch finisher (approx. 2000
per cartridge X 3 cartridges)
AR-SC3
(16 to 68* lbs.)
2
AR-PN4D*
3
4 4
A3, B4, A4, A4R, B5,
B5R,
11"x17", 8-1/2"x14",
8-1/2"x13",
8-1/2"x11",
8-1/2"x11"R
3
3
3-3