Sharp MX-M700U Operation Manual page 49

Touch the [DATE FORMAT] key.
5
The following screen appears.
SYSTEM SETTINGS
DATE FORMAT
2010/04/04/SUN 11:30
YYYY/MM/DD
MM/DD/YYYY
DD/MM/YYYY
If you wish to change the format of the date
6
and time, touch the desired format keys.
Touched keys are highlighted.
The selected format is applied to lists printed out in
"LIST PRINT".
7 Touch the [OK] key.
OK
AME
ON
T 12-HOUR
8 Touch the [OK] key.
9 To exit the settings, touch the [EXIT] key.
SYSTEM SETTINGS
DEFAULT
TOTAL COUNT
SETTINGS
ADDRESS CONTROL SENDER CONTROL
DOCUMENT FILING
ADMINISTRATOR SETTINGS
CONTROL
OK
DAY-NAME
POSITION
FIRST 12-HOUR
LAST
24-HOUR
You will return to the
date and time setting
screen.
EXIT
PAPER TRAY
LIST PRINT
SETTINGS
FAX DATA PRINTER
RECEIVE/FORWARD CONDITION
More information on setting procedures
In the following type of screen, a setting is selected
by touching the key so that a checkmark (
appears. The settings below are configured to
allow use of tray 1 in print, copy, and fax modes. To
display the next screen, touch the
SYSTEM SETTINGS
PAPER TRAY SETTINGS
TYPE / SIZE
TRAY1
PLAIN / A4
DOC.
I-FAX
PRINT COPY FAX
FILING
SYSTEM SETTINGS
)
or keys.
OK
FIXED PAPER SIDE
1/8
DISABLE DUPLEX
2
DISABLE STAPLE
DISABLE PUNCH
2-19