Replacing The Toner Cartridges - Sharp MX-M700U Operation Manual

REPLACING THE TONER CARTRIDGES

When toner runs low, a message will appear to inform you that the toner cartridge must be replaced.
NOTE
To view the approximate amount of toner remaining, hold down the [COPY] key during printing or when the
machine is on standby. The percentage of toner remaining will appear in the display while you hold down the key.
When the percentage falls to "20-0%" , obtain a new toner cartridge and keep it ready for replacement.
Follow the steps below to replace the toner cartridge.
1 Open the front cover.
2 Remove the toner cartridge gently.
3 Remove the new toner cartridge from the
box and shake it five or six times
horizontally.
CAUTION
● Do not throw the toner cartridge into a fire. Toner may fly and cause burns.
● Store toner cartridges out of the reach of small children.
NOTE
Place the used toner cartridge in the plastic bag and store it. When placing the toner cartridge in the bag, insert
it horizontally, not vertically. If the cartridge is stood on end, the collected used toner may spill out and soil the floor
or your clothes.
Hold the toner cartridge
with both hands as
shown in the illustration,
and pull it out of the
machine.
NOTE
Shake the toner
cartridge well to
ensure that the toner
flows well and will not
stick to the inside of
the cartridge.
4 Insert the new toner cartridge.
5 Push the cartridge in until it locks securely
in place.
6 Close the front cover.
Shake the toner
cartridge horizontally.
Do not rotate it as shown
at left.
Align the toner cartridge
with the insert hole and
push it in as shown.
Do not rotate the
cartridge.
2-21
2