Removing An Original Misfeed; Removing A Misfed Original From The Automatic Document Feeder - Sharp MX-M700U Operation Manual

REMOVING AN ORIGINAL MISFEED

Removing a misfed original from the automatic document feeder

If an original misfeed occurs in the automatic document feeder, follow the steps below to remove the misfed original.
NOTES
● For misfeed removal in the main unit and other peripheral devices, see page 2-23
● When a misfeed occurs, touch the [INFORMATION] key to display detailed information for misfeed removal.
1 Removing misfeeds from each location.
● Check location A
● Check location B
● Misfeed in the transfer unit
● Misfeed in the document exit unit
Open the document
feeder cover and gently
remove the misfed
original without tearing
it. Close the document
feeder cover.
Open the document
transfer cover, hold the
paper guide open, and
remove the misfed
original.
Open the document
transfer cover. Rotate
the transfer roller in the
direction of the arrow
and gently remove the
original without tearing it.
Check locations A and B in the diagram at left to
remove the original.
2 Open and close the document feeder
cover.
misfeed is removed from location B.
A message may appear indicating the number of
originals which must be returned to the document
feeder tray. Return the originals to the document
feeder tray and press the [START] key.
Opening and closing the
cover clears the misfeed
display. Copying cannot
be resumed until this
step is performed.
However, this step is not
necessary after a
2-31
2