Finishing Modes And Finisher Functions - Sharp MX-M700U Operation Manual

FINISHER AND SADDLE STITCH FINISHER

Finishing modes and finisher functions

Touch the [OUTPUT] key on the main screen of copy mode to display the screen that allows selection of sort, staple
sort, group function, centreline stapling, and the output tray.
[GROUP] key (See page 3-4.)
1
When Group is selected, copies will be grouped by
page.
[STAPLE SORT] key (See page 3-4.)
2
When Staple Sort is selected, sorted sets will be
stapled and delivered to the offset tray. (They will
not be offset stacked.) Select from three stapling
positions.
[SORT] key (See page 3-4.)
3
When Sort is selected, sets of copies will be
collated.
[FINISHER TRAY] key (See page 3-2.)
4
When the offset function is selected, output is
delivered offset to the finisher tray. (The finisher
tray is automatically selected when the staple sort
function is turned on.)
[OFFSET] key (See page 3-4.)
5
The offset function operates when a checkmark
appears in this key. (The offset checkmark is
automatically cleared when the staple sort function
is enabled.)
3-6
OUTPUT
SORT
STAPLE
SORT
GROUP
FINISHER CENTRE
TRAY TRAY
OFFSET
[CENTRE TRAY] key
6
If the centre tray is selected, output paper will be
delivered to the exit tray located above the main
unit.
[OK] key
7
Touch to close the [OUTPUT] screen and return to
the main screen.
[SADDLE STITCH] key (See page 3-5.)
8
This is displayed when the saddle stitch finisher is
installed, and is used to staple pages at the centre
and fold them in half to create a pamphlet.
Touch this key to display the pamphlet copy
setting screen (page 5-6). (This is only possible
when the [AUTOMATIC
checkbox is selected in the administrator settings
(see page 12 of the administrator settings guide).)
[PUNCH] key (See page 3-5.)
9
This is used to punch holes in printed pages when
an optional punch module is installed.
NOTE
When a functions is selected, it is highlighted.
0
OK
SADDLE
PUNCH
STITCH
SADDLE STITCH]