Sharp MX-M700U Operation Manual page 2

Each instruction also covers the optional units used with these products.
In some areas, the "POWER" switch positions are marked "I" and " " on the copier instead of "ON"
and "OFF".
The symbol "
this "POWER" switch position.
If your copier is so marked, please read "I" for "ON" and "
Caution!
For a complete electrical disconnection, pull out the main plug.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Shielded interface cables must be used with this equipment to maintain compliance with EMC regulations.
" denotes the copier is not completely de-energized but in a stand-by condition at
" for "OFF".