Download  Print this page

Advertisement

Configuring system BIOS

Configure the system BIOS to enable embedded SATA RAID functionality.
1.
To enter the system BIOS setup, press F10.
2.
Use the arrow keys to highlight the desired language, and then press Enter.
3.
Use the arrows to highlight Storage>Storage Options, and then press Enter.
4.
Use the up or down arrow key to highlight SATA Emulation.
5.
Use the left or right arrow key to select RAID+AHCI.
6.
To accept the new setting, press F10.
7.
Use the arrows to highlight Advanced>Power-On Options, and then press Enter.
8.
Use the up or down arrow key to highlight POST Messages.
9.
Use the left or right arrow key to select Enable.
10.
To accept the new setting, press F10.
11.
Use the arrow keys to highlight Advanced>Device Options, and then press Enter.
12.
Use the up or down arrow key to highlight SATA RAID Option ROM Download, and then
press Enter.
13.
Use the left or right arrow key to select Enable.
14.
To accept the new setting, press F10.
15.
Use the arrows to highlight File>Save Changes and Exit, and then press Enter.
16.
Press
F10
ENWW
when prompted.
Configuring SATA RAID devices
209

Advertisement

Table of Contents

   Related Manuals for HP Z400

Comments to this Manuals

Symbols: 0
Latest comments: