Product Information - HP Z400 Maintenance And Service Manual

Product information

Table D-1
HP Cool Tools
Regulatory information
Accessories
System board
Serial number and Certificate of
Authenticity (COA) labels (if
applicable)
Linux
236 Appendix D Locating HP resources
Product information
Topic
Most HP Microsoft Windows workstations are preloaded
with additional software that is not automatically installed
during first boot. Additionally, a number of valuable tools
on your workstation are preinstalled that may enhance
system performance. To access or learn more about these
applications, choose one of the following options:
●
●
To learn more about these applications, click HP Cool
Tools—Learn More.
To install or launch the applications, click the appropriate
application icon.
Refer to the Safety & Regulatory Information guide for
product Class information. You can also refer to the label
on the workstation chassis.
For complete and current information on supported
accessories and components, see
workstations.
A diagram of the system board is located on the inside of
the side access panel. Also, additional information is
located in the Maintenance and Service Guide on the Web
at http://www.hp.com/support/workstation_manuals/.
Serial number labels are on the top panel, or on the side of
the unit at the rear, depending on the workstation model.
The COA label is generally located on the top or side
panel near the serial number label. Some workstations
have this label on the bottom of the unit.
For information on running Linux on HP workstations, see
http://www.hp.com/linux/.
Location
Click the HP Cool Tools icon on the desktop, or
Open the HP Cool Tools folder by selecting Start >
All Programs > HP Cool Tools.
http://www.hp.com/go/
ENWW