Download  Print this page

Advertisement

other nonerror text messages. If a POST error occurs, the error is displayed regardless of the mode
selected. To manually switch to POST Messages Enabled during POST, press any key except
through F12.
Specify an Ownership Tag, which appears when the workstation is powered on or restarted.
Specify the Asset Tag or property identification number assigned by the company to this
workstation.
Enable power-on password prompts during system restarts (warm-starts) and power on.
Hide or show the integrated I/O functionality, including serial, USB, or parallel ports, audio, or
embedded NIC. Hidden devices are inaccessible, which increases system security.
Enable or disable removable media boot ability.
Enable or disable removable media write ability (if supported by hardware).
Replicate the workstation setup by saving system configuration information on CD or diskette and
restoring it on workstations.
Execute self-tests on specified SATA and SAS hard disk drives (if supported by the drive).
32
Chapter 4 System management
F1
ENWW

Advertisement

Table of Contents

   Related Manuals for HP Z400

Comments to this Manuals

Symbols: 0
Latest comments: