Diagnostics And Troubleshooting On; Power Consumption And Heat Dissipation; System Fans; Resetting The Power Supply - HP Z400 Maintenance And Service Manual

Power consumption and heat dissipation

Power consumption and heat dissipation specifications are available for multiple configurations. To
review available specifications, see http://www.hp.com/go/quickspecs.
To reach zero power consumption, unplug the workstation from the power outlet or use a power strip
with an on/off switch. For additional information about power-saving features, see the operating system
installation instructions.
This product is in compliance with U.S. Executive Order 13221.

System fans

This workstation includes:
One rear system fan
●
One CPU heatsink fan
●
One power supply fan
●
Additional fans may include:
Optional front system fan for special environments.
●
CPU voltage regulator fan for Z400s equipped with liquid cooling solution.
●
Onboard fans on some graphics cards.
●

Resetting the power supply

If an overload triggers the power supply overload protection, power is immediately disconnected.
To reset the power supply:
1. Disconnect the power cord from the workstation.
2.
Determine what caused the overload and fix the problem. For troubleshooting information, see
Diagnostics and troubleshooting on page
3. Reconnect the power cord and restart the workstation.
When you power off the workstation through the operating system, power consumption falls below
what is considered low power consumption but does not reach zero. This low power consumption
feature extends the life of the power supply.
ENWW
164.
Workstation specifications
11